What amp contactor do I need for my ICP system?

The correct replacement for ICP model WPA4484000RKB1 — 1-Pole 40A 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPA4484000RKB1 — 1-Pole 40A 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP Contactor for WPA4484000RKB1 — 1-Pole 40A 24V Coil | Ships Today

Name: ICP Contactor for WPA4484000RKB1 — 1-Pole 40A 24V Coil | Ships Today
Brand: ICP
SKU: 1173690
Price: 45.44 USD
Availability: InStock

SKU: 1173690 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine ICP single-pole contactor (OEM #1173690) is the electrically-controlled switch that energizes your condensing unit's compressor and outdoor fan. When the thermostat calls for cooling, the 24V control circuit energizes the contactor coil, pulling the contacts closed to deliver line voltage to the compressor. Rated at 40 amps with a 24V coil, it is a 1-pole design with one switched leg. Contactors are among the most common failure points in an air conditioner — pitted or welded contacts cause hard starts, chattering, or a unit that won't run, while a burned-out coil leaves the system completely dead on a cooling call.

Specifications

Spec	Value
Part Number	1173690
Type	Definite Purpose Contactor, 1-Pole
Brand	ICP (Tempstar / Heil)
Contact Rating	40 Amps
Coil Voltage	24 VAC
Poles	1

Compatibility

Directly fits ICP/Tempstar/Heil condensing unit model WPA4484000RKB1 and related Comfortmaker, Heil, and Tempstar outdoor units using a 1-pole 40A 24V contactor. Always confirm amperage, pole count, and coil voltage against the part you are replacing.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and verify zero voltage with a multimeter.
Access — Remove the condensing unit's electrical access panel.
Document — Photograph all wiring connections before disconnecting anything.
Remove — Label and disconnect the line, load, and 24V coil leads, then unscrew the old contactor from the mounting bracket.
Install — Mount the new contactor and reconnect each wire exactly per your photo.
Test — Restore power, call for cooling, and confirm the contacts pull in and the compressor and fan start.

Signs You Need a Replacement

Compressor won't start or hums on a cooling call
Loud chattering or buzzing from the contactor
Visibly pitted, burned, or welded contacts
Coil reads open or out of spec on a multimeter

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Contactor for WPA4484000RKB1...

$45.44

Frequently Asked Questions

Does this Contactor fit my ICP WPA4484000RKB1 — 1-Pole 40A 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP WPA4484000RKB1 — 1-Pole 40A 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP WPA4484000RKB1 — 1-Pole 40A 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu