What amp contactor do I need for my ICP system?

The correct replacement for ICP model RGS210HDEA0AAAA | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS210HDEA0AAAA | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP Contactor 2-Pole 30A / 3-Pole 40A 24V for RGS210HDEA0AAAA | Ships Today

Name: ICP Contactor 2-Pole 30A / 3-Pole 40A 24V for RGS210HDEA0AAAA | Ships Today
Brand: ICP
SKU: 1171554
Price: 41.60 USD
Availability: InStock

SKU: 1171554 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM definite-purpose contactor for the ICP/Tempstar/Heil RGS210HDEA0AAAA system, available as a 2-pole 30A unit (part number 1171554) and a 3-pole 40A unit (part number 1172449), both with a 24-volt coil. The contactor is the high-current switch that energizes the compressor and condenser fan whenever the thermostat closes the 24V control circuit. Over time the contacts pit, burn, or weld and the coil weakens, leading to a unit that won't start, won't shut off, or hums and chatters. Installing the correct OEM contactor restores clean, reliable switching and protects the compressor from voltage drop caused by failing contacts.

Specifications

Spec	Value
Part Numbers	1171554 (2P 30A), 1172449 (3P 40A)
Type	Definite-Purpose Contactor
Brand	ICP (Heil / Tempstar / Comfortmaker)
Coil Voltage	24 VAC
Current Rating	30A (2-pole) / 40A (3-pole)
Poles	2-Pole or 3-Pole

Compatibility

Fits the ICP/Tempstar/Heil RGS210HDEA0AAAA and related RGS-series condensing units. Choose the pole count and amperage that matches your original contactor — count the line terminals and confirm the FLA/amp rating before ordering.

Installation Guide

Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter.
Access — Remove the condensing-unit service panel.
Document — Photograph all line, load, and 24V coil wires before disconnecting.
Remove — Transfer wires one at a time or label them, then unscrew the old contactor from its bracket.
Install — Mount the new contactor and reconnect every wire exactly per your photo.
Test — Restore power and call for cooling; confirm the contactor pulls in cleanly and the compressor and fan start.

Signs You Need a Replacement

Compressor/fan won't start or won't shut off
Loud humming, buzzing, or chattering at the contactor
Pitted, burned, or welded contacts
Coil reads open or fails to pull in at 24V

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Contactor 2-Pole 30A / 3-Pol...

$41.60

Frequently Asked Questions

Does this Contactor fit my ICP RGS210HDEA0AAAA | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP RGS210HDEA0AAAA | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP RGS210HDEA0AAAA | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu