What amp contactor do I need for my ICP system?

The correct replacement for ICP model WJH342000K000A2 — With Shunt | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WJH342000K000A2 — With Shunt | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP Contactor 1-Pole 30A 24V for WJH342000K000A2 — With Shunt | Ships Today

Name: ICP Contactor 1-Pole 30A 24V for WJH342000K000A2 — With Shunt | Ships Today
Brand: ICP
SKU: 1172472
Price: 32.44 USD
Availability: InStock

SKU: 1172472 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM 1-pole definite purpose contactor (part #1172472) for the ICP/Heil/Tempstar WJH342000K000A2 heat pump. Rated for 30 amps with a 24-volt control coil and an integrated shunt, the contactor is the electrically-controlled switch that energizes the compressor and outdoor fan motor each time the thermostat calls for cooling or heating. The shunt connection maintains a path to the run capacitor and crankcase circuit even when the contactor is open. A failed contactor is one of the most common reasons an outdoor unit won't start, hums without engaging, or runs continuously because the contacts have welded shut.

Specifications

Spec	Value
Part Number	1172472
Type	1-Pole Definite Purpose Contactor
Brand	ICP / Heil / Tempstar
Contact Rating	30 Amps
Coil Voltage	24V
Poles	1
Feature	Integrated Shunt

Compatibility

Designed as the factory replacement for the ICP/Heil/Tempstar model WJH342000K000A2 and related condensing units that use a single-pole 30A 24V contactor. Always confirm the amp rating and coil voltage of the part you are removing before installing.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and verify zero voltage with a multimeter.
Access — Remove the service panel from the condenser unit.
Document — Photograph all wire connections before disconnecting.
Remove — Disconnect the line, load, coil, and shunt wires; unscrew the old contactor from its mounting bracket.
Install — Mount the new contactor and reconnect every wire exactly per your photo.
Test — Restore power and confirm the contactor pulls in and the compressor/fan energize on a call.

Signs You Need a Replacement

Outdoor unit hums but the compressor and fan won't start.
Pitted, burned, or welded contacts visible on the old part.
Buzzing or chattering from the contactor under load.
Unit runs continuously and won't shut off when the call ends.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Contactor 1-Pole 30A 24V for...

$32.44

Frequently Asked Questions

Does this Contactor fit my ICP WJH342000K000A2 — With Shunt | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP WJH342000K000A2 — With Shunt | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP WJH342000K000A2 — With Shunt | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu