What amp contactor do I need for my ICP system?

The correct replacement for ICP model YG036GB1 — Single Pole | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number YG036GB1 — Single Pole | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP Contactor 1-Pole 25A 24V for YG036GB1 — Single Pole | Ships Today

Name: ICP Contactor 1-Pole 25A 24V for YG036GB1 — Single Pole | Ships Today
Brand: ICP
SKU: YG036GB1
Price: 36.34 USD
Availability: InStock

SKU: YG036GB1 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM single-pole (1-pole) 25-amp contactor with a 24V coil (part #1050699) is the electrical switch that powers the compressor and condenser fan in your ICP/Tempstar/Heil YG036GB1. When the thermostat calls for cooling, the 24V control circuit energizes the contactor coil, pulling the contacts closed to deliver line voltage to the compressor. Over time the contacts pit, arc, and weld from repeated switching — a failing 25A contactor causes the outdoor unit to chatter, fail to start, or run continuously. This is a 1-pole, 25A, 24V-coil unit matched to the YG036GB1 load.

Specifications

Spec	Value
Part Number	1050699
Type	Definite Purpose Contactor (1-Pole)
Brand	ICP / Tempstar / Heil
Rating	25A
Coil Voltage	24V
Poles	1

Compatibility

Direct OEM replacement for the ICP Tempstar Heil YG036GB1 condensing unit. Fits ICP-family systems using a 1-pole 25A 24V-coil contactor. Verify pole count, amperage, and coil voltage against your existing part before installing.

Installation Guide

Safety First — Disconnect power at the disconnect and breaker; verify zero voltage with a multimeter.
Access — Remove the condenser service panel to expose the contactor.
Document — Photograph all line, load, and 24V coil wiring before disconnecting.
Remove — Label and disconnect the wires, then unscrew the old contactor from the mounting bracket.
Install — Mount the new contactor and reconnect each wire per your photo.
Test — Restore power and confirm the contactor pulls in on a cooling call.

Signs You Need a Replacement

Outdoor unit hums or chatters but won't start
Burnt, pitted, or welded contacts
Compressor runs continuously and won't shut off
Buzzing coil or no pull-in on a cooling call

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Contactor 1-Pole 25A 24V for...

$36.34

Frequently Asked Questions

Does this Contactor fit my ICP YG036GB1 — Single Pole | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP YG036GB1 — Single Pole | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP YG036GB1 — Single Pole | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu