What HP motor do I need for my ICP unit?

The correct replacement for ICP model WPH4484000RKA1 — 1/5 HP 810 RPM | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPH4484000RKA1 — 1/5 HP 810 RPM | Ships Today.

My AC fan is not spinning. What part do I need?

A fan that does not spin, spins slowly, or makes grinding or squealing noises needs a new motor. Grinding means the bearings have failed. Squealing means the bearings are dry. No spin with a humming sound means the capacitor may be the issue. Check the motor capacitor before replacing the entire motor.

ICP

ICP Condenser Fan Motor for WPH4484000RKA1 — 1/5 HP 810 RPM | Ships Today

Name: ICP Condenser Fan Motor for WPH4484000RKA1 — 1/5 HP 810 RPM | Ships Today
Brand: ICP
SKU: 1186359
Price: 185.83 USD
Availability: InStock

SKU: 1186359 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM condenser fan motor (part #1186359) drives the outdoor fan that pulls air across the condenser coil on your ICP/Tempstar/Heil WPH4484000RKA1 heat pump. Rated 1/5 HP at 810 RPM, it keeps the coil cool so the system can reject heat efficiently. A failed condenser fan motor causes the outdoor unit to overheat and trip on high-pressure, leads to weak cooling, or lets the compressor run hot and short-cycle. Bad bearings, an open winding, or a seized shaft are typical end-of-life symptoms. Installing the correct OEM motor restores proper airflow and protects the compressor from heat-related failure.

Specifications

Spec	Value
Part Number	1186359
Type	Condenser Fan Motor
Brand	ICP (Tempstar / Heil)
Horsepower	1/5 HP
Speed	810 RPM

Compatibility

Direct OEM replacement for the ICP/Tempstar/Heil WPH4484000RKA1 outdoor unit. Verify HP, RPM, rotation, voltage, and shaft size against your existing motor before installing.

Installation Guide

Safety First — Disconnect power at the disconnect and breaker; verify zero voltage with a multimeter.
Access — Remove the top grille/fan assembly screws to lift out the fan and motor.
Document — Photograph the motor wiring, capacitor leads, and fan blade position/depth on the shaft.
Remove — Loosen the blade set screw, pull the blade, and unbolt the old motor from the bracket.
Install — Mount the new motor, set the blade to the same depth, and reconnect wiring per your photo.
Test — Restore power, call for cooling, and confirm the fan spins up to full speed in the correct direction.

Signs You Need a Replacement

Outdoor fan won't start or runs slowly
Grinding or squealing bearings
Unit trips on high-pressure or short-cycles
Motor housing is hot, smells burnt, or won't turn freely

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Condenser Fan Motor for WPH4...

$185.83

Frequently Asked Questions

Does this Fan Motor fit my ICP WPH4484000RKA1 — 1/5 HP 810 RPM | Ships Today?

Yes. This is the factory-specified OEM fan motor for the ICP WPH4484000RKA1 — 1/5 HP 810 RPM | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the fan motor on my ICP WPH4484000RKA1 — 1/5 HP 810 RPM | Ships Today?

Difficulty: Medium-Hard (1–2 hrs)
Step 1: Turn off breaker. Step 2: Note motor specs: HP, RPM, voltage, rotation direction. Step 3: Remove old motor from mounting. Step 4: Transfer fan blade to new motor. Step 5: Mount new motor, reconnect wiring. Step 6: Restore power, verify rotation direction.

My AC fan isn’t spinning. What part do I need?

Fan not spinning, spinning slowly, or making grinding/squealing noises = motor failure. Grinding = bearings failed. Squealing = bearings dry. No spin + hum = check the motor capacitor first before replacing the entire motor.

Is this fan motor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP fan motor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu