What HP motor do I need for my ICP unit?

The correct replacement for ICP model WPG4604090RKA1 — 1/5 HP 810 RPM | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG4604090RKA1 — 1/5 HP 810 RPM | Ships Today.

My AC fan is not spinning. What part do I need?

A fan that does not spin, spins slowly, or makes grinding or squealing noises needs a new motor. Grinding means the bearings have failed. Squealing means the bearings are dry. No spin with a humming sound means the capacitor may be the issue. Check the motor capacitor before replacing the entire motor.

ICP

ICP Condenser Fan Motor for WPG4604090RKA1 — 1/5 HP 810 RPM | Ships Today

Name: ICP Condenser Fan Motor for WPG4604090RKA1 — 1/5 HP 810 RPM | Ships Today
Brand: ICP
SKU: WPG4604090RKA1
Price: 214.44 USD
Availability: InStock

SKU: WPG4604090RKA1 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM condenser fan motor (part number 1186359) drives the outdoor fan on your ICP WPG4604090RKA1 system, pulling air across the condenser coil to reject heat during cooling. Rated at 1/5 HP and 810 RPM, it is matched to the original blade and airflow design. When a condenser fan motor fails, the outdoor unit overheats, the compressor trips on high-pressure or thermal overload, and cooling performance collapses. Worn bearings, an open winding, or a failed start capacitor are typical culprits. Installing the correct OEM motor restores proper heat rejection and protects the compressor from heat-related damage.

Specifications

Spec	Value
OEM Part Number	1186359
Type	Condenser Fan Motor
Brand	ICP
Horsepower	1/5 HP
Speed	810 RPM

Compatibility

Direct OEM replacement for the condenser fan motor in the ICP / Tempstar / Heil WPG4604090RKA1 package unit, and fits related ICP-family condensing units using a 1/5 HP, 810 RPM motor. Verify horsepower, speed, rotation, shaft size, and mounting before installation, and pair with the correctly rated run capacitor.

Installation Guide

Safety First — Disconnect power at the breaker and outdoor disconnect, then verify zero voltage with a multimeter.
Access — Remove the top grille or service panel to reach the fan motor and blade.
Document — Photograph the wiring, blade position, and motor orientation before disconnecting.
Remove — Loosen the blade set screw, pull the blade, disconnect the motor leads, and unbolt the old motor from its bracket.
Install — Mount the new motor with the correct shaft-up orientation, reinstall the blade at the original depth, and reconnect the leads.
Test — Restore power and confirm the fan spins freely in the correct direction and the unit cools.

Signs You Need a Replacement

Outdoor fan does not spin or needs a push to start.
Compressor trips on overload while the fan sits idle.
Loud grinding, humming, or wobbling from the motor bearings.
Poor cooling and an overheating condensing unit.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Condenser Fan Motor for WPG4...

$214.44

Frequently Asked Questions

Does this Fan Motor fit my ICP WPG4604090RKA1 — 1/5 HP 810 RPM | Ships Today?

Yes. This is the factory-specified OEM fan motor for the ICP WPG4604090RKA1 — 1/5 HP 810 RPM | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the fan motor on my ICP WPG4604090RKA1 — 1/5 HP 810 RPM | Ships Today?

Difficulty: Medium-Hard (1–2 hrs)
Step 1: Turn off breaker. Step 2: Note motor specs: HP, RPM, voltage, rotation direction. Step 3: Remove old motor from mounting. Step 4: Transfer fan blade to new motor. Step 5: Mount new motor, reconnect wiring. Step 6: Restore power, verify rotation direction.

My AC fan isn’t spinning. What part do I need?

Fan not spinning, spinning slowly, or making grinding/squealing noises = motor failure. Grinding = bearings failed. Squealing = bearings dry. No spin + hum = check the motor capacitor first before replacing the entire motor.

Is this fan motor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP fan motor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu