What HP motor do I need for my ICP unit?

The correct replacement for ICP model WPG4484130RKA1 – 1/5 HP 810 RPM | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG4484130RKA1 – 1/5 HP 810 RPM | Ships Today.

My AC fan is not spinning. What part do I need?

A fan that does not spin, spins slowly, or makes grinding or squealing noises needs a new motor. Grinding means the bearings have failed. Squealing means the bearings are dry. No spin with a humming sound means the capacitor may be the issue. Check the motor capacitor before replacing the entire motor.

ICP

ICP Condenser Fan Motor for WPG4484130RKA1 – 1/5 HP 810 RPM | Ships Today

Name: ICP Condenser Fan Motor for WPG4484130RKA1 – 1/5 HP 810 RPM | Ships Today
Brand: ICP
SKU: WPG4484130RKA1-GEN
Price: 119.00 USD
Availability: InStock

SKU: WPG4484130RKA1-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM condenser fan motor (part number 1186359) is the factory replacement for the ICP/Tempstar/Heil WPG4484130RKA1 packaged unit. Rated at 1/5 HP and 810 RPM, it drives the outdoor condenser fan to pull air across the coil and reject heat. When this motor fails, the compressor runs but the outdoor fan stops, causing the unit to overheat, trip on high head pressure, and short-cycle. A failing motor often shows up as a humming outdoor unit with a stalled fan, hot-to-the-touch motor housing, or a fan that spins only when pushed by hand.

Specifications

Spec	Value
Part Number	1186359
Type	Condenser Fan Motor
Brand	ICP
Horsepower	1/5 HP
Speed	810 RPM
Fit	OEM Replacement

Compatibility

Engineered as the direct OEM replacement for the ICP / Tempstar / Heil WPG4484130RKA1 packaged gas/electric unit. Always verify the HP, RPM, voltage, rotation, and shaft diameter against your existing motor and capacitor before installing.

Installation Guide

Safety First – Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter.
Access – Remove the top fan grille/service panel to reach the motor and fan blade.
Document – Photograph all wiring and the capacitor connections before disconnecting.
Remove – Loosen the fan blade set screw, pull the blade, then unbolt the old motor from the bracket and disconnect the leads.
Install – Mount the new motor, reinstall the blade at the correct depth, and reconnect leads per your photo.
Test – Restore power and confirm the fan spins freely in the correct direction and the unit cools.

Signs You Need a Replacement

Outdoor fan won't start but the compressor hums
Motor is hot, noisy, or smells burnt
Fan blade spins only when nudged by hand
Unit trips on high pressure or short-cycles

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Condenser Fan Motor for WPG4...

$119.00

Frequently Asked Questions

Does this Fan Motor fit my ICP WPG4484130RKA1 – 1/5 HP 810 RPM | Ships Today?

Yes. This is the factory-specified OEM fan motor for the ICP WPG4484130RKA1 – 1/5 HP 810 RPM | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the fan motor on my ICP WPG4484130RKA1 – 1/5 HP 810 RPM | Ships Today?

Difficulty: Medium-Hard (1–2 hrs)
Step 1: Turn off breaker. Step 2: Note motor specs: HP, RPM, voltage, rotation direction. Step 3: Remove old motor from mounting. Step 4: Transfer fan blade to new motor. Step 5: Mount new motor, reconnect wiring. Step 6: Restore power, verify rotation direction.

My AC fan isn’t spinning. What part do I need?

Fan not spinning, spinning slowly, or making grinding/squealing noises = motor failure. Grinding = bearings failed. Squealing = bearings dry. No spin + hum = check the motor capacitor first before replacing the entire motor.

Is this fan motor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP fan motor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu