ICP Condenser Fan Motor for WPG4364060RKA1 — 1/5 HP 810 RPM | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This is the OEM condenser fan motor (P/N 1186359) for the ICP (Tempstar / Heil / Comfortmaker) WPG4364060RKA1 packaged unit. Rated 1/5 HP at 810 RPM, this motor spins the outdoor fan blade that pulls air across the condenser coil to reject heat during cooling. When the condenser fan motor fails, head pressure climbs, the compressor overheats, and the system trips on a high-pressure or overload fault — often leaving warm air at the registers. A motor that hums but won't start, runs hot, has noisy or seized bearings, or cycles on its internal overload is at the end of its life. Always replace the run capacitor along with the motor for a reliable repair.
Specifications
| Spec | Value |
|---|---|
| Part Number | 1186359 |
| Type | Condenser Fan Motor |
| Brand | ICP |
| Horsepower | 1/5 HP |
| Speed | 810 RPM |
| Application | Outdoor condenser fan |
Compatibility
Direct OEM fit for the ICP WPG4364060RKA1 packaged unit and other Tempstar, Heil, and Comfortmaker models using a 1/5 HP 810 RPM condenser fan motor. Verify horsepower, RPM, rotation, shaft size, and voltage against your existing motor before installing.
Installation Guide
- Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter and discharge the run capacitor.
- Access — Remove the top fan grille/panel to reach the motor and blade.
- Document — Photo the wiring, capacitor connections, and blade position on the shaft before removing.
- Remove — Loosen the fan blade set screw, pull the blade, unbolt the old motor from the bracket, and disconnect the leads.
- Install — Mount the new motor, transfer the blade at the same depth and orientation, and reconnect leads and capacitor per your photo.
- Test — Restore power and confirm the fan spins in the correct direction at full speed with no wobble or noise.
Signs You Need a Replacement
- Outdoor fan hums but won't start or spins slowly
- Noisy, grinding, or seized motor bearings
- System trips on high head pressure or overload
- Motor runs hot and cycles on its internal overload
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days