What HP motor do I need for my ICP unit?

The correct replacement for ICP model WPG4364060LKB1 — 1/5 HP 810 RPM | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG4364060LKB1 — 1/5 HP 810 RPM | Ships Today.

My AC fan is not spinning. What part do I need?

A fan that does not spin, spins slowly, or makes grinding or squealing noises needs a new motor. Grinding means the bearings have failed. Squealing means the bearings are dry. No spin with a humming sound means the capacitor may be the issue. Check the motor capacitor before replacing the entire motor.

ICP

ICP Condenser Fan Motor for WPG4364060LKB1 — 1/5 HP 810 RPM | Ships Today

Name: ICP Condenser Fan Motor for WPG4364060LKB1 — 1/5 HP 810 RPM | Ships Today
Brand: ICP
SKU: 1186359-GEN
Price: 119.95 USD
Availability: InStock

SKU: 1186359-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM condenser fan motor (part number 1186359, MOTOR CND 1/5 HP 810) is the factory-spec replacement for the ICP/Tempstar/Heil WPG4364060LKB1 package unit. Rated at 1/5 HP and 810 RPM on 208/230 volts, it spins the outdoor condenser fan that pulls air across the coil to reject heat. When this motor fails, the compressor runs but the system cannot dump heat, leading to high head pressure, warm air at the registers, tripped breakers, and eventual compressor lockout. Common failure signs include a motor that hums but won't start, a fan that runs slow or seizes, or a hot, burnt-smelling motor housing.

Specifications

Spec	Value
Part Number	1186359
Type	Condenser Fan Motor
Brand	ICP / Tempstar / Heil
Horsepower	1/5 HP
Speed	810 RPM
Voltage	208/230V
Application	Condenser Fan

Compatibility

Engineered as the direct OEM replacement for the ICP/Tempstar/Heil WPG4364060LKB1 packaged unit and closely related WPG43-series models that share the same 1/5 HP, 810 RPM condenser fan assembly. Always confirm shaft diameter, rotation, and mounting against your existing motor.

Installation Guide

Safety First — Disconnect power at the unit and main panel, then verify zero voltage with a multimeter.
Access — Remove the fan grille and top panel to reach the motor.
Document — Photograph all wire connections and the run capacitor leads before disconnecting.
Remove — Unbolt the fan blade from the old shaft, free the motor from its mount, and label the leads.
Install — Mount the new motor, transfer the fan blade at the correct height, and reconnect wiring per your photo.
Test — Restore power and confirm smooth rotation, correct direction, and normal head pressure.

Signs You Need a Replacement

Outdoor fan hums but does not spin (often with a bad capacitor)
Fan runs slow, wobbles, or the bearings are noisy/grinding
Motor overheats and shuts down on thermal overload
High head pressure and warm indoor air while the compressor runs

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Condenser Fan Motor for WPG4...

$119.95

Frequently Asked Questions

Does this Fan Motor fit my ICP WPG4364060LKB1 — 1/5 HP 810 RPM | Ships Today?

Yes. This is the factory-specified OEM fan motor for the ICP WPG4364060LKB1 — 1/5 HP 810 RPM | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the fan motor on my ICP WPG4364060LKB1 — 1/5 HP 810 RPM | Ships Today?

Difficulty: Medium-Hard (1–2 hrs)
Step 1: Turn off breaker. Step 2: Note motor specs: HP, RPM, voltage, rotation direction. Step 3: Remove old motor from mounting. Step 4: Transfer fan blade to new motor. Step 5: Mount new motor, reconnect wiring. Step 6: Restore power, verify rotation direction.

My AC fan isn’t spinning. What part do I need?

Fan not spinning, spinning slowly, or making grinding/squealing noises = motor failure. Grinding = bearings failed. Squealing = bearings dry. No spin + hum = check the motor capacitor first before replacing the entire motor.

Is this fan motor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP fan motor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu