What HP motor do I need for my ICP unit?

The correct replacement for ICP model WCA5364GKA100 — 1/5 HP Outdoor Motor | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WCA5364GKA100 — 1/5 HP Outdoor Motor | Ships Today.

My AC fan is not spinning. What part do I need?

A fan that does not spin, spins slowly, or makes grinding or squealing noises needs a new motor. Grinding means the bearings have failed. Squealing means the bearings are dry. No spin with a humming sound means the capacitor may be the issue. Check the motor capacitor before replacing the entire motor.

ICP

ICP Condenser Fan Motor for WCA5364GKA100 — 1/5 HP Outdoor Motor | Ships Today

Name: ICP Condenser Fan Motor for WCA5364GKA100 — 1/5 HP Outdoor Motor | Ships Today
Brand: ICP
SKU: 1186447-GEN
Price: 119.00 USD
Availability: InStock

SKU: 1186447-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the OEM condenser fan motor (part number 1186447) for the ICP/Tempstar/Heil WCA5364GKA100 condensing unit. Rated at 1/5 HP, this motor spins the outdoor fan blade that pulls air across the condenser coil to reject heat from the refrigerant. A healthy condenser fan motor is essential for proper system pressures and cooling capacity — when it fails, head pressure climbs, the compressor overheats, and the system can trip on a high-pressure or thermal limit. Typical failure symptoms include a fan that won't spin, a motor that hums but doesn't start, a hot or noisy motor with worn bearings, or a unit that short-cycles on high-pressure protection. The motor's run capacitor should be tested and replaced alongside the motor if it shows wear.

Specifications

Spec	Value
Part Number	1186447
Type	Condenser Fan Motor
Brand	ICP / Tempstar / Heil
Horsepower	1/5 HP
Application	Outdoor Condenser Fan

Compatibility

Designed as a direct-fit replacement for the ICP/Tempstar/Heil WCA5364GKA100 air conditioning condensing unit. Commonly used across the WCA5 series of ICP-family condensers that share this 1/5 HP fan motor. Confirm shaft diameter, rotation direction, and mounting before installing, and reuse the correct matching run capacitor.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and breaker, then verify zero voltage with a multimeter.
Access — Remove the top fan grille and service panel to reach the motor.
Document — Photograph all wire and capacitor connections before disconnecting.
Remove — Loosen the fan blade set screw, pull the blade, disconnect the motor wiring, and unbolt the old motor from the bracket.
Install — Mount the new motor, set the fan blade to the correct depth in the orifice, and reconnect wiring per your photo.
Test — Restore power and confirm the fan spins freely in the correct direction with no unusual noise.

Signs You Need a Replacement

Outdoor fan won't start or only hums
Grinding, squealing, or rumbling from worn bearings
Motor runs hot or shuts off after a few minutes
High head pressure or repeated high-pressure trips

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Condenser Fan Motor for WCA5...

$119.00

Frequently Asked Questions

Does this Fan Motor fit my ICP WCA5364GKA100 — 1/5 HP Outdoor Motor | Ships Today?

Yes. This is the factory-specified OEM fan motor for the ICP WCA5364GKA100 — 1/5 HP Outdoor Motor | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the fan motor on my ICP WCA5364GKA100 — 1/5 HP Outdoor Motor | Ships Today?

Difficulty: Medium-Hard (1–2 hrs)
Step 1: Turn off breaker. Step 2: Note motor specs: HP, RPM, voltage, rotation direction. Step 3: Remove old motor from mounting. Step 4: Transfer fan blade to new motor. Step 5: Mount new motor, reconnect wiring. Step 6: Restore power, verify rotation direction.

My AC fan isn’t spinning. What part do I need?

Fan not spinning, spinning slowly, or making grinding/squealing noises = motor failure. Grinding = bearings failed. Squealing = bearings dry. No spin + hum = check the motor capacitor first before replacing the entire motor.

Is this fan motor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP fan motor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu