ICP Condenser Fan Motor for RGS150LRAA0AGAA — 1/4 HP 208/230V | Ships Today

Overview

This OEM condenser fan motor drives the outdoor fan blade on your ICP RGS150LRAA0AGAA package unit, pulling air across the condenser coil to reject heat during the cooling cycle. Rated at 1/4 HP and 208/230V, it is built for continuous outdoor duty in high-heat environments. The kit ships with the OD fan motor mounting clamp (OEM 1171116) that secures the motor to the bracket arms. A failing condenser fan motor causes the system to overheat, trip on high-pressure, and lose cooling capacity — often the root cause of a unit that runs but won't cool.

Specifications

Compatibility

Direct fit for the ICP RGS150LRAA0AGAA package gas/electric unit and matching ICP-family condensing sections sold under Tempstar, Heil, and Comfortmaker that share this motor and clamp. Confirm horsepower, voltage, rotation, and shaft size against your existing motor before installing.

Installation Guide

1. Safety First — Disconnect power at the unit disconnect and verify zero voltage at the contactor with a multimeter.
2. Access — Remove the top grille or fan deck to reach the motor and fan blade.
3. Document — Photograph the wire colors, capacitor terminals, and blade position on the shaft.
4. Remove — Loosen the blade set screw, pull the blade, release the OD clamp, and lift out the old motor.
5. Install — Seat the new motor in the clamp, transfer the blade to the same depth and orientation, and wire it per your photo.
6. Test — Restore power, confirm correct rotation, and verify the fan reaches full speed without wobble or noise.

Signs You Need a Replacement

• Outdoor fan won't start or hums without spinning
• Unit trips on high-pressure or repeatedly resets
• System runs but delivers little or no cooling
• Hot motor housing, burnt smell, or grinding bearings

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day hassle-free returns. Backed by the National HVAC Parts fitment guarantee.