What HP motor do I need for my ICP unit?

The correct replacement for ICP model RGS150HEAA0AKAA — 1/4 HP 208/230V | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS150HEAA0AKAA — 1/4 HP 208/230V | Ships Today.

My AC fan is not spinning. What part do I need?

A fan that does not spin, spins slowly, or makes grinding or squealing noises needs a new motor. Grinding means the bearings have failed. Squealing means the bearings are dry. No spin with a humming sound means the capacitor may be the issue. Check the motor capacitor before replacing the entire motor.

ICP

ICP Condenser Fan Motor for RGS150HEAA0AKAA — 1/4 HP 208/230V | Ships Today

Name: ICP Condenser Fan Motor for RGS150HEAA0AKAA — 1/4 HP 208/230V | Ships Today
Brand: ICP
SKU: 1171116-GEN
Price: 169.00 USD
Availability: InStock

SKU: 1171116-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM condenser fan motor drives the outdoor fan on your ICP RGS150HEAA0AKAA system, pulling ambient air across the condenser coil to reject heat during the cooling cycle. Rated at 1/4 HP on 208/230V, it ships with the OD fan-motor mounting clamp (OEM 1171116) that secures the motor to the condenser bracket and holds it in proper alignment with the fan blade. When this motor fails, the compressor can run while the fan stays still — causing the unit to overheat, trip on high-head pressure, and eventually shut down on the compressor's internal overload. Replacing a worn motor promptly protects the far more expensive compressor.

Specifications

Spec	Value
OEM Part Number	1171116
Type	Condenser Fan Motor
Brand	ICP (Tempstar / Heil / Comfortmaker)
Horsepower	1/4 HP
Voltage	208/230V
Includes	OD mounting clamp

Compatibility

A direct OEM fit for the ICP RGS150HEAA0AKAA and matching ICP-family condensing units sold under Tempstar, Heil, Comfortmaker, and Arcoaire. Verify HP, voltage, rotation, and shaft diameter against your existing motor before installing.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and verify zero voltage with a multimeter.
Access — Remove the condenser top grille to reach the motor and fan blade.
Document — Photograph the motor wiring and capacitor leads before disconnecting.
Remove — Pull the fan blade with a puller, unbolt the old motor, and free it from the mounting clamp.
Install — Seat the new motor in the clamp, reinstall the blade at the correct depth, and wire to the run capacitor per your photo.
Test — Restore power and confirm the fan spins up smoothly and pulls air upward.

Signs You Need a Replacement

Outdoor fan won't start or hums without turning
Compressor runs but the fan blade is stationary
Hot motor housing, burning smell, or seized bearings
Unit trips on high-pressure or overload after short run times

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Condenser Fan Motor for RGS1...

$169.00

Frequently Asked Questions

Does this Fan Motor fit my ICP RGS150HEAA0AKAA — 1/4 HP 208/230V | Ships Today?

Yes. This is the factory-specified OEM fan motor for the ICP RGS150HEAA0AKAA — 1/4 HP 208/230V | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the fan motor on my ICP RGS150HEAA0AKAA — 1/4 HP 208/230V | Ships Today?

Difficulty: Medium-Hard (1–2 hrs)
Step 1: Turn off breaker. Step 2: Note motor specs: HP, RPM, voltage, rotation direction. Step 3: Remove old motor from mounting. Step 4: Transfer fan blade to new motor. Step 5: Mount new motor, reconnect wiring. Step 6: Restore power, verify rotation direction.

My AC fan isn’t spinning. What part do I need?

Fan not spinning, spinning slowly, or making grinding/squealing noises = motor failure. Grinding = bearings failed. Squealing = bearings dry. No spin + hum = check the motor capacitor first before replacing the entire motor.

Is this fan motor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP fan motor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu