What HP motor do I need for my ICP unit?

The correct replacement for ICP model WPG4484130LKB1 — OEM 1186359 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG4484130LKB1 — OEM 1186359 | Ships Today.

My AC fan is not spinning. What part do I need?

A fan that does not spin, spins slowly, or makes grinding or squealing noises needs a new motor. Grinding means the bearings have failed. Squealing means the bearings are dry. No spin with a humming sound means the capacitor may be the issue. Check the motor capacitor before replacing the entire motor.

ICP

ICP Condenser Fan Motor 1/5 HP for WPG4484130LKB1 — OEM 1186359 | Ships Today

Name: ICP Condenser Fan Motor 1/5 HP for WPG4484130LKB1 — OEM 1186359 | Ships Today
Brand: ICP
SKU: WPG4484130LKB1
Price: 194.94 USD
Availability: InStock

SKU: WPG4484130LKB1 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM 1/5 HP condenser fan motor (part 1186359, "MOTOR CND 1/5 HP 810") is the direct-fit outdoor fan motor for the ICP Tempstar Heil WPG4484130LKB1. It spins the condenser fan blade to pull ambient air across the outdoor coil, rejecting the heat the system absorbs indoors. A failed condenser motor causes the compressor to overheat and trip on high-pressure or thermal limits, leading to weak cooling, short cycling, and eventual compressor damage if left unaddressed. Replacing a worn motor promptly protects the most expensive component in the system.

Specifications

Spec	Value
Part Number	1186359
Type	Condenser Fan Motor
Brand	ICP / Tempstar / Heil
Horsepower	1/5 HP
Voltage	208/230V
Frame	810 series
Application	Outdoor Condenser Fan

Compatibility

Built for the ICP / Tempstar / Heil WPG4484130LKB1 condensing unit and other ICP-family units using the 1186359 motor. Confirm horsepower, voltage, rotation, and shaft size against your existing motor before installing.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and breaker, then verify zero voltage with a multimeter.
Access — Remove the top grille/fan assembly service panel to reach the motor.
Document — Photograph all motor leads and the capacitor wiring before disconnecting.
Remove — Loosen the blade set screw, pull the fan blade, unbolt the motor from the bracket, and disconnect the leads.
Install — Mount the new motor, reinstall the blade at the correct depth, and reconnect leads to the run capacitor per your photo.
Test — Restore power, start cooling, and confirm the fan spins freely in the correct direction with steady airflow.

Signs You Need a Replacement

Condenser fan won't start or hums without turning.
Motor runs hot, is noisy, or has worn/seized bearings.
System short cycles or trips on high-pressure during cooling.
Weak cooling with a hot outdoor unit and stalled fan blade.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Condenser Fan Motor 1/5 HP f...

$194.94

Frequently Asked Questions

Does this Fan Motor fit my ICP WPG4484130LKB1 — OEM 1186359 | Ships Today?

Yes. This is the factory-specified OEM fan motor for the ICP WPG4484130LKB1 — OEM 1186359 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the fan motor on my ICP WPG4484130LKB1 — OEM 1186359 | Ships Today?

Difficulty: Medium-Hard (1–2 hrs)
Step 1: Turn off breaker. Step 2: Note motor specs: HP, RPM, voltage, rotation direction. Step 3: Remove old motor from mounting. Step 4: Transfer fan blade to new motor. Step 5: Mount new motor, reconnect wiring. Step 6: Restore power, verify rotation direction.

My AC fan isn’t spinning. What part do I need?

Fan not spinning, spinning slowly, or making grinding/squealing noises = motor failure. Grinding = bearings failed. Squealing = bearings dry. No spin + hum = check the motor capacitor first before replacing the entire motor.

Is this fan motor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP fan motor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu