What HP motor do I need for my ICP unit?

The correct replacement for ICP model WPG4424060RKA1 — 810 RPM | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG4424060RKA1 — 810 RPM | Ships Today.

My AC fan is not spinning. What part do I need?

A fan that does not spin, spins slowly, or makes grinding or squealing noises needs a new motor. Grinding means the bearings have failed. Squealing means the bearings are dry. No spin with a humming sound means the capacitor may be the issue. Check the motor capacitor before replacing the entire motor.

ICP

ICP Condenser Fan Motor 1/5 HP for WPG4424060RKA1 — 810 RPM | Ships Today

Name: ICP Condenser Fan Motor 1/5 HP for WPG4424060RKA1 — 810 RPM | Ships Today
Brand: ICP
SKU: WPG4424060RKA1-GEN
Price: 139.00 USD
Availability: InStock

SKU: WPG4424060RKA1-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM 1/5 HP condenser fan motor (OEM part 1186359, MOTOR CND 1/5 HP 810) is the factory-spec replacement for the ICP / Tempstar / Heil WPG4424060RKA1 packaged unit. It spins the outdoor condenser fan to pull air across the coil and reject heat during the cooling cycle. A failing condenser fan motor typically shows up as a fan that hums but won't start, a fan that runs hot and cuts out on thermal overload, high head pressure, or a unit that trips the breaker. Worn bearings often announce themselves with grinding or squealing before the motor fails outright.

Specifications

Spec	Value
Part Number	1186359
Type	Condenser Fan Motor
Brand	ICP / Tempstar / Heil
Horsepower	1/5 HP
Speed	810 RPM
Fits Model	WPG4424060RKA1
Fitment	OEM Direct Replacement

Compatibility

Built for the ICP-family WPG4424060RKA1 gas/electric packaged unit and its shared Tempstar, Heil, and Comfortmaker variants. Confirm horsepower, RPM, rotation, and shaft diameter against your existing motor before installing.

Installation Guide

Safety First — Disconnect power at the unit disconnect and verify zero voltage with a multimeter.
Access — Remove the top grille/fan assembly and the electrical service panel.
Document — Photograph every wire and the run-capacitor connections before disconnecting.
Remove — Loosen the fan-blade set screw, pull the blade, then unbolt the old motor from the mount.
Install — Mount the new motor, transfer the fan blade at the correct depth, and reconnect wiring per your photo, including the capacitor leads.
Test — Restore power and confirm the fan starts immediately, spins the correct direction, and runs without overheating.

Signs You Need a Replacement

Fan hums but won't spin, or needs a push to start
Motor runs hot and shuts off on overload
Grinding, squealing, or seized bearings
High head pressure or warm air with a non-spinning outdoor fan

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Condenser Fan Motor 1/5 HP f...

$139.00

Frequently Asked Questions

Does this Fan Motor fit my ICP WPG4424060RKA1 — 810 RPM | Ships Today?

Yes. This is the factory-specified OEM fan motor for the ICP WPG4424060RKA1 — 810 RPM | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the fan motor on my ICP WPG4424060RKA1 — 810 RPM | Ships Today?

Difficulty: Medium-Hard (1–2 hrs)
Step 1: Turn off breaker. Step 2: Note motor specs: HP, RPM, voltage, rotation direction. Step 3: Remove old motor from mounting. Step 4: Transfer fan blade to new motor. Step 5: Mount new motor, reconnect wiring. Step 6: Restore power, verify rotation direction.

My AC fan isn’t spinning. What part do I need?

Fan not spinning, spinning slowly, or making grinding/squealing noises = motor failure. Grinding = bearings failed. Squealing = bearings dry. No spin + hum = check the motor capacitor first before replacing the entire motor.

Is this fan motor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP fan motor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu