What HP motor do I need for my ICP unit?

The correct replacement for ICP model WPG4364060RKB1 — Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG4364060RKB1 — Ships Today.

My AC fan is not spinning. What part do I need?

A fan that does not spin, spins slowly, or makes grinding or squealing noises needs a new motor. Grinding means the bearings have failed. Squealing means the bearings are dry. No spin with a humming sound means the capacitor may be the issue. Check the motor capacitor before replacing the entire motor.

ICP

ICP Condenser Fan Motor 1/5 HP for WPG4364060RKB1 — Ships Today

Name: ICP Condenser Fan Motor 1/5 HP for WPG4364060RKB1 — Ships Today
Brand: ICP
SKU: WPG4364060RKB1
Price: 168.94 USD
Availability: InStock

SKU: WPG4364060RKB1 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM condenser fan motor (part #1186359) is a 1/5 HP, 810 RPM motor built for the ICP / Tempstar / Heil WPG4364060RKB1 packaged gas-electric unit. The condenser fan motor drives the fan blade that pulls outdoor air across the condenser coil to reject heat during cooling operation. When this motor fails, the system loses its ability to shed heat — head pressure climbs, the compressor overheats and trips on its overload, and cooling output collapses. Common failure modes include seized bearings, an open winding, or a motor that runs briefly then shuts down hot. This OEM-spec replacement matches the original horsepower, speed, rotation, and mounting so the fan moves the correct airflow and keeps the compressor operating within safe pressures.

Specifications

Spec	Value
Part Number	1186359
Type	Condenser Fan Motor
Brand	ICP (Tempstar / Heil)
Horsepower	1/5 HP
Speed	810 RPM
Fits Model	WPG4364060RKB1
Fitment	OEM

Compatibility

Built for the ICP / Tempstar / Heil / Comfortmaker WPG4364060RKB1 packaged gas-electric unit. Verify shaft diameter, rotation, and 1/5 HP / 810 RPM ratings against your original before installing, and reuse the matching run capacitor.

Installation Guide

Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter.
Access — Remove the top fan grille or condenser service panel to reach the motor and fan blade.
Document — Photograph the wiring, capacitor connections, and the fan blade's position on the shaft.
Remove — Loosen the blade set screw, slide the blade off, unbolt the old motor, and disconnect the leads.
Install — Mount the new motor, transfer the blade to the same shaft depth and orientation, and wire it to the capacitor and contactor per your photo.
Test — Restore power, call for cooling, and confirm the fan spins the correct direction at full speed with normal amp draw.

Signs You Need a Replacement

Fan blade will not turn or hums without starting
Noisy, grinding, or seized bearings
Motor runs hot and trips on overload after a few minutes
High head pressure and poor cooling with a still or slow fan

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Condenser Fan Motor 1/5 HP f...

$168.94

Frequently Asked Questions

Does this Fan Motor fit my ICP WPG4364060RKB1 — Ships Today?

Yes. This is the factory-specified OEM fan motor for the ICP WPG4364060RKB1 — Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the fan motor on my ICP WPG4364060RKB1 — Ships Today?

Difficulty: Medium-Hard (1–2 hrs)
Step 1: Turn off breaker. Step 2: Note motor specs: HP, RPM, voltage, rotation direction. Step 3: Remove old motor from mounting. Step 4: Transfer fan blade to new motor. Step 5: Mount new motor, reconnect wiring. Step 6: Restore power, verify rotation direction.

My AC fan isn’t spinning. What part do I need?

Fan not spinning, spinning slowly, or making grinding/squealing noises = motor failure. Grinding = bearings failed. Squealing = bearings dry. No spin + hum = check the motor capacitor first before replacing the entire motor.

Is this fan motor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP fan motor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu