ICP Blower Motor Module for WAHL244C1 — 1/3 HP 230V | Ships Today

Overview

This OEM 1/3 HP blower motor module (part number 1190333, supersedes/pairs with blower motor 1187346) drives the indoor air handler on your ICP WAHL244C1. Rated at 1/3 HP and 230V, it spins the blower wheel that moves conditioned air through your ductwork on both heating and cooling cycles. A failing blower motor module produces weak or no airflow, overheating shutdowns, loud humming or grinding bearings, or intermittent operation as the motor draws excessive current. Because comfort and proper system static pressure depend entirely on this motor, a degraded unit will hurt efficiency long before it fully dies.

Specifications

Compatibility

Direct OEM replacement for the ICP / Heil / Tempstar / Comfortmaker WAHL244C1 air handler blower assembly. Matches the original 1/3 HP, 230V specification for proper airflow and fit.

Installation Guide

1. Safety First — Disconnect power at the breaker and verify zero voltage with a multimeter.
2. Access — Remove the blower compartment service panel.
3. Document — Photograph all motor and module wiring connections before disconnecting.
4. Remove — Slide out the blower assembly, mark the blower wheel set-screw position, then separate the old motor/module from the housing.
5. Install — Mount the new motor module, transfer the blower wheel to the correct depth, and reconnect each lead per your photo.
6. Test — Restore power and confirm smooth, quiet operation at each fan speed.

Signs You Need a Replacement

• Weak airflow or no airflow from the supply registers
• Loud humming, grinding, or rattling from the blower
• Motor overheats and shuts down on its thermal limit
• Intermittent or erratic blower operation

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.