ICP Blower Motor Module for WAHL244B1 — 1/3 HP 230V | Ships Today

Overview

This OEM 1/3 HP blower motor module (part number 1190332, paired with blower motor 1185024) powers the indoor air handler on your ICP WAHL244B1. Rated at 1/3 HP and 230V, it turns the blower wheel that circulates conditioned air through your ductwork during both heating and cooling. When this motor module weakens or fails, you'll notice reduced or no airflow, thermal-overload shutdowns, loud bearing noise, or erratic starting as the motor draws excess current. Since system airflow and static pressure ride entirely on this motor, replacing a degraded unit restores comfort and protects the rest of the equipment.

Specifications

Compatibility

Direct OEM replacement for the ICP / Heil / Tempstar / Comfortmaker WAHL244B1 air handler blower assembly. Matches the original 1/3 HP, 230V specification for correct airflow and fit.

Installation Guide

1. Safety First — Disconnect power at the breaker and verify zero voltage with a multimeter.
2. Access — Remove the blower compartment service panel.
3. Document — Photograph all motor and module wiring before disconnecting.
4. Remove — Slide out the blower assembly, mark the blower wheel set-screw position, then separate the old motor/module from the housing.
5. Install — Mount the new motor module, set the blower wheel to the correct depth, and reconnect each lead per your photo.
6. Test — Restore power and confirm smooth, quiet operation at every fan speed.

Signs You Need a Replacement

• Weak or no airflow from the supply registers
• Loud humming, grinding, or rattling from the blower
• Motor overheats and trips on its thermal limit
• Intermittent or erratic blower starting

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.