ICP Blower Motor for WPG4244060LKB1 — OEM 1/2 HP Furnace Blower | Ships Today

Overview

This genuine OEM 1/2 HP blower motor (part #1188128) is the indoor air-mover for the ICP WPG4244060LKB1 packaged gas-electric unit. The blower motor drives the squirrel-cage wheel that pushes conditioned air through the heat exchanger and evaporator coil and out to the supply ductwork. Rated at 1/2 horsepower, it provides the airflow your system needs for both heating and cooling operation. A failing blower motor causes weak airflow, overheating lockouts, or a complete loss of circulation, and is a frequent cause of furnace high-limit trips and frozen coils.

Specifications

Compatibility

Direct factory replacement for the ICP / Tempstar / Heil WPG4244060LKB1 packaged unit's indoor blower assembly. Also fits related ICP-family units specifying a 1/2 HP blower motor — confirm shaft size, rotation, and mounting against your existing motor before ordering.

Installation Guide

1. Safety First — Disconnect power at the unit and breaker, then verify zero voltage with a multimeter.
2. Access — Remove the blower compartment service panel and slide out the blower assembly.
3. Document — Photograph all motor wiring, capacitor leads, and the blower wheel position on the shaft.
4. Remove — Disconnect the motor leads, loosen the wheel set-screw, pull the wheel, and unbolt the old motor from the housing.
5. Install — Mount the new motor, set the blower wheel to the same shaft depth, tighten the set-screw, and reconnect wiring per your photo.
6. Test — Restore power and verify the blower spins freely, ramps to speed, and moves strong airflow.

Signs You Need a Replacement

• Weak or no airflow from the supply registers
• Motor hums but won't start, or runs hot and shuts down
• Loud grinding, squealing, or rattling bearing noise
• Furnace high-limit trips or evaporator coil freezes from low airflow

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.