What HP motor do I need for my ICP unit?

The correct replacement for ICP model WFMR070A036B3 — 1/3 HP 3-Speed | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFMR070A036B3 — 1/3 HP 3-Speed | Ships Today.

My AC fan is not spinning. What part do I need?

A fan that does not spin, spins slowly, or makes grinding or squealing noises needs a new motor. Grinding means the bearings have failed. Squealing means the bearings are dry. No spin with a humming sound means the capacitor may be the issue. Check the motor capacitor before replacing the entire motor.

ICP

ICP Blower Motor for WFMR070A036B3 — 1/3 HP 3-Speed | Ships Today

Name: ICP Blower Motor for WFMR070A036B3 — 1/3 HP 3-Speed | Ships Today
Brand: ICP
SKU: 1185856
Price: 214.50 USD
Availability: InStock

SKU: 1185856 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM blower motor (part number 1185856) is the 1/3 HP, 3-speed direct-drive motor that powers the indoor blower wheel on the ICP Tempstar Heil WFMR070A036B3 furnace. It circulates conditioned air through the ductwork during both heating and cooling. The three speed taps let the installer match airflow to the furnace's heating and cooling stages. When a blower motor fails — worn bearings, an open winding, or a failed start capacitor circuit — you lose airflow, which causes high-limit shutdowns in heat mode and frozen coils in cooling mode.

Specifications

Spec	Value
Part Number	1185856
Type	Direct-Drive Blower Motor
Brand	ICP (Tempstar / Heil)
Horsepower	1/3 HP
Speeds	3-Speed
Application	Furnace / Air Handler Blower
Fitment	OEM Replacement

Compatibility

A direct OEM replacement for the ICP Tempstar Heil WFMR070A036B3 furnace blower assembly and compatible ICP-family units using the same 1/3 HP 3-speed motor. Confirm shaft diameter, rotation direction, and mounting before installing, and reuse a run capacitor of the correct MFD rating.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the blower compartment door and slide out the blower assembly.
Document — Photograph every motor speed-tap and capacitor wire before disconnecting.
Remove — Disconnect the wiring and capacitor, loosen the blower wheel set screw, and unbolt the old motor from the mounting band.
Install — Mount the new motor, slide on the blower wheel and set the wheel position, then reconnect the speed taps and capacitor per your photo.
Test — Restore power and confirm the blower spins up smoothly on the selected heating and cooling speeds.

Signs You Need a Replacement

Blower hums but will not start, or starts only with a manual spin.
Loud grinding, squealing, or rumbling bearing noise from the blower.
Motor runs hot, smells of burning, or trips on internal overload.
Weak or no airflow leading to high-limit trips or a frozen evaporator coil.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Blower Motor for WFMR070A036...

$214.50

Frequently Asked Questions

Does this Fan Motor fit my ICP WFMR070A036B3 — 1/3 HP 3-Speed | Ships Today?

Yes. This is the factory-specified OEM fan motor for the ICP WFMR070A036B3 — 1/3 HP 3-Speed | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the fan motor on my ICP WFMR070A036B3 — 1/3 HP 3-Speed | Ships Today?

Difficulty: Medium-Hard (1–2 hrs)
Step 1: Turn off breaker. Step 2: Note motor specs: HP, RPM, voltage, rotation direction. Step 3: Remove old motor from mounting. Step 4: Transfer fan blade to new motor. Step 5: Mount new motor, reconnect wiring. Step 6: Restore power, verify rotation direction.

My AC fan isn’t spinning. What part do I need?

Fan not spinning, spinning slowly, or making grinding/squealing noises = motor failure. Grinding = bearings failed. Squealing = bearings dry. No spin + hum = check the motor capacitor first before replacing the entire motor.

Is this fan motor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP fan motor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu