What HP motor do I need for my ICP unit?

The correct replacement for ICP model WFAR040A030C1 — 1/3 HP Furnace Blower | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFAR040A030C1 — 1/3 HP Furnace Blower | Ships Today.

My AC fan is not spinning. What part do I need?

A fan that does not spin, spins slowly, or makes grinding or squealing noises needs a new motor. Grinding means the bearings have failed. Squealing means the bearings are dry. No spin with a humming sound means the capacitor may be the issue. Check the motor capacitor before replacing the entire motor.

ICP

ICP Blower Motor for WFAR040A030C1 — 1/3 HP Furnace Blower | Ships Today

Name: ICP Blower Motor for WFAR040A030C1 — 1/3 HP Furnace Blower | Ships Today
Brand: ICP
SKU: 1186379
Price: 219.70 USD
Availability: InStock

SKU: 1186379 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM 1/3 HP blower motor (OEM 1186379) drives the indoor blower wheel on your ICP / Tempstar / Heil WFAR040A030C1 gas furnace, circulating conditioned air through the supply ducts during heating and cooling. The motor spins the squirrel-cage blower to move heated air across the heat exchanger and out to the living space. A worn blower motor reduces airflow, which can trip the furnace limit switch on a high-heat lockout or freeze the evaporator coil in cooling. Failing bearings, an open winding, or a seized shaft all point to motor replacement.

Specifications

Spec	Value
Part Number	1186379
Type	Direct-Drive Blower Motor
Horsepower	1/3 HP
Brand	ICP / Tempstar / Heil / Comfortmaker
Voltage	115V
Application	Furnace Blower
Fits Model	WFAR040A030C1

Compatibility

Designed for the ICP family WFAR040A030C1 furnace and the Tempstar, Heil, and Comfortmaker units sharing the same blower assembly. Verify shaft diameter, rotation, and mounting before installing, and reuse your existing run capacitor if it tests within spec.

Installation Guide

Safety First — Disconnect power at the switch and breaker; verify zero voltage with a multimeter.
Access — Remove the blower compartment service panel and slide out the blower assembly.
Document — Photograph all motor leads, capacitor wiring, and blower wheel position on the shaft.
Remove — Loosen the wheel set screw, pull the blower wheel, and unbolt the motor from its mount.
Install — Transfer the wheel to the new motor at the same depth, mount the motor, and reconnect leads per your photo.
Test — Restore power, call for blower operation, and confirm smooth, quiet airflow at the registers.

Signs You Need a Replacement

Weak or no airflow from the supply vents
Grinding, squealing, or humming from the blower compartment
Motor runs hot, smells burnt, or trips on overload
Furnace shuts down on high-limit due to low airflow

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Blower Motor for WFAR040A030...

$219.70

Frequently Asked Questions

Does this Fan Motor fit my ICP WFAR040A030C1 — 1/3 HP Furnace Blower | Ships Today?

Yes. This is the factory-specified OEM fan motor for the ICP WFAR040A030C1 — 1/3 HP Furnace Blower | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the fan motor on my ICP WFAR040A030C1 — 1/3 HP Furnace Blower | Ships Today?

Difficulty: Medium-Hard (1–2 hrs)
Step 1: Turn off breaker. Step 2: Note motor specs: HP, RPM, voltage, rotation direction. Step 3: Remove old motor from mounting. Step 4: Transfer fan blade to new motor. Step 5: Mount new motor, reconnect wiring. Step 6: Restore power, verify rotation direction.

My AC fan isn’t spinning. What part do I need?

Fan not spinning, spinning slowly, or making grinding/squealing noises = motor failure. Grinding = bearings failed. Squealing = bearings dry. No spin + hum = check the motor capacitor first before replacing the entire motor.

Is this fan motor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP fan motor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu