What HP motor do I need for my ICP unit?

The correct replacement for ICP model WAXL364A2 — 1/2 HP | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WAXL364A2 — 1/2 HP | Ships Today.

My AC fan is not spinning. What part do I need?

A fan that does not spin, spins slowly, or makes grinding or squealing noises needs a new motor. Grinding means the bearings have failed. Squealing means the bearings are dry. No spin with a humming sound means the capacitor may be the issue. Check the motor capacitor before replacing the entire motor.

ICP

ICP Blower Motor for WAXL364A2 — 1/2 HP | Ships Today

Name: ICP Blower Motor for WAXL364A2 — 1/2 HP | Ships Today
Brand: ICP
SKU: 1185155-GEN
Price: 159.00 USD
Availability: InStock

SKU: 1185155-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM ICP blower motor (part #1185155) drives the indoor blower wheel that circulates conditioned air through your ductwork. Rated at 1/2 HP, it delivers the airflow your WAXL364A2 was engineered around — too little airflow causes frozen coils in cooling and overheated heat exchangers in heating. A failing blower motor shows up as weak airflow at the registers, loud humming or grinding bearings, a motor that runs hot and cycles on thermal overload, or a blower that won't start at all. Replacing a worn motor restores proper system airflow, efficiency, and capacity.

Specifications

Spec	Value
Part Number	1185155
Type	Blower Motor
Brand	ICP
Horsepower	1/2 HP
Application	Furnace / Air Handler Blower

Compatibility

Built for the ICP / Tempstar / Heil WAXL364A2 and related units using the 1185155 blower motor. Verify HP, shaft size, rotation, and the OEM part number against your existing motor before installing.

Installation Guide

Safety First — Disconnect power at the breaker and verify zero voltage with a multimeter.
Access — Remove the blower compartment service panel.
Document — Photograph all motor wiring and the blower wheel position on the shaft.
Remove — Slide out the blower assembly, loosen the set screw, pull the wheel, and unbolt the old motor from its mount.
Install — Mount the new motor, reinstall the blower wheel at the same depth, set the set screw on the shaft flat, and reconnect wiring per your photo.
Test — Restore power and confirm smooth, quiet operation and correct rotation.

Signs You Need a Replacement

Weak or no airflow from the supply registers
Loud humming, squealing, or grinding bearings
Motor overheats and shuts off on thermal overload
Blower won't start or starts only with a push

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Blower Motor for WAXL364A2 —...

$159.00

Frequently Asked Questions

Does this Fan Motor fit my ICP WAXL364A2 — 1/2 HP | Ships Today?

Yes. This is the factory-specified OEM fan motor for the ICP WAXL364A2 — 1/2 HP | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the fan motor on my ICP WAXL364A2 — 1/2 HP | Ships Today?

Difficulty: Medium-Hard (1–2 hrs)
Step 1: Turn off breaker. Step 2: Note motor specs: HP, RPM, voltage, rotation direction. Step 3: Remove old motor from mounting. Step 4: Transfer fan blade to new motor. Step 5: Mount new motor, reconnect wiring. Step 6: Restore power, verify rotation direction.

My AC fan isn’t spinning. What part do I need?

Fan not spinning, spinning slowly, or making grinding/squealing noises = motor failure. Grinding = bearings failed. Squealing = bearings dry. No spin + hum = check the motor capacitor first before replacing the entire motor.

Is this fan motor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP fan motor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu