Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP 40VA Transformer for WPG3482090RKB1 — 208/230V to 24V Class 2 | Ships Today
ICP

ICP 40VA Transformer for WPG3482090RKB1 — 208/230V to 24V Class 2 | Ships Today

SKU: 1176032-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This OEM 40VA control transformer (part 1173691) steps 208/230V line voltage down to the 24V control circuit that powers the contactor coil, gas valve, thermostat, and control board on the ICP / Tempstar / Heil WPG3482090RKB1 packaged unit. This listing includes the matching 24V barrier (part 1176032) used to isolate and protect the low-voltage wiring. When a transformer fails — usually from a shorted control circuit, a stuck contactor, or simple age — the entire 24V system goes dead: no thermostat response, no cooling or heating call, and often a blown low-voltage fuse on the control board. A transformer that hums loudly, runs hot, or shows 0V on its secondary under load needs replacement.

Specifications

Spec Value
Part Number 1173691 (transformer), 1176032 (24V barrier)
Part Type Step-Down Control Transformer, Class 2
Brand ICP / Tempstar / Heil
Rating 40 VA
Primary Voltage 208/230V
Secondary Voltage 24V
Model WPG3482090RKB1

Compatibility

Direct-fit OEM replacement for the ICP/Tempstar/Heil WPG3482090RKB1 packaged gas/electric unit. The 40VA 208/230-to-24V transformer is shared across many ICP-family packaged units. Verify part number 1173691 and your primary voltage tap before installing.

Installation Guide

  1. Safety First — Disconnect power at the unit disconnect. Verify zero voltage with a multimeter at the line terminals.
  2. Access — Remove the control/electrical compartment service panel.
  3. Document — Photograph all primary and secondary wire connections before disconnecting.
  4. Remove — Disconnect the primary leads (matching your 208 or 230V tap) and the 24V secondary leads, then unbolt the transformer and barrier from the bracket.
  5. Install — Mount the new transformer and 24V barrier, land the primary leads on the correct voltage tap, and reconnect the 24V secondary per your photo.
  6. Test — Restore power and confirm 24–28V across the secondary, then verify the thermostat commands cooling and heating normally.

Signs You Need a Replacement

  • No 24V control power — thermostat blank or unit fully unresponsive
  • Repeatedly blown low-voltage fuse on the control board
  • Transformer hums loudly, runs very hot, or smells burnt
  • 0V or low voltage measured on the secondary under load

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Transformer fit my ICP WPG3482090RKB1 — 208/230V to 24V Class 2 | Ships Today?
Yes. This is the factory-specified OEM transformer for the ICP WPG3482090RKB1 — 208/230V to 24V Class 2 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the transformer on my ICP WPG3482090RKB1 — 208/230V to 24V Class 2 | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Photo wiring connections. Step 3: Disconnect wires from old transformer. Step 4: Remove mounting hardware. Step 5: Install new transformer, reconnect wires matching voltage ratings. Step 6: Verify 24V output with multimeter.
My thermostat has no power. What failed?
Thermostat with no display = failed 24V transformer (or blown control board fuse). Check the 3A/5A fuse on the control board first ($1–$5 fix). If fuse is good but no 24V output from transformer, replace transformer.
Is this transformer compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP transformer?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online