What are the specs for this Transformer?

The correct replacement for ICP model VNE075F14A1 — 115V to 24V Furnace Control Transformer | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number VNE075F14A1 — 115V to 24V Furnace Control Transformer | Ships Today.

ICP

ICP 40VA Transformer for VNE075F14A1 — 115V to 24V Furnace Control Transformer | Ships Today

Name: ICP 40VA Transformer for VNE075F14A1 — 115V to 24V Furnace Control Transformer | Ships Today
Brand: ICP
SKU: 1011626
Price: 36.34 USD
Availability: InStock

SKU: 1011626 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM control transformer (part number 1011626, TRANS 115>24 40VA) steps the furnace's 115V line voltage down to the 24V low-voltage power that runs the thermostat, gas valve, control board, and ignition circuits on the ICP / Tempstar / Heil VNE075F14A1. Rated at 40VA, it supplies enough low-voltage current for the full furnace control circuit. A failed transformer is one of the most common causes of a completely dead furnace: no 24V means no thermostat response, no call for heat, and no blower. Replacing it with the correct OEM unit restores full low-voltage control power and proper operation.

Specifications

Spec	Value
Part Number	1011626
Type	Control / Step-Down Transformer
Brand	ICP / Tempstar / Heil
Rating	40 VA
Primary Voltage	115V
Secondary Voltage	24V
Fits Model	VNE075F14A1

Compatibility

Direct OEM replacement for the ICP VNE075F14A1 furnace. This 40VA 115-to-24V transformer also fits many ICP-family furnaces marketed under Tempstar, Heil, and Comfortmaker that originally used part 1011626. Verify the VA rating and primary/secondary voltages against your existing transformer before installing.

Installation Guide

Safety First — Disconnect electrical power at the furnace switch and breaker. Verify zero voltage at the transformer terminals with a multimeter.
Access — Remove the furnace control/blower panel to reach the transformer, typically mounted near the control board or junction box.
Document — Photograph all primary (line) and secondary (24V) wire connections before disconnecting.
Remove — Disconnect the leads, remove the mounting screws or bracket, and take out the failed transformer.
Install — Mount the new transformer, then reconnect the 115V primary and 24V secondary wiring exactly per your photo.
Test — Restore power and confirm 24V at the secondary, a responsive thermostat, and a normal heat cycle.

Signs You Need a Replacement

Completely dead furnace — no thermostat display or no response to a call for heat
No measurable 24V at the transformer secondary or control board R/C terminals
Blown low-voltage fuse on the control board, or a burnt/melted transformer smell
Intermittent control failures after a short or wiring fault

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 40VA Transformer for VNE075F...

$36.34

Frequently Asked Questions

Does this Transformer fit my ICP VNE075F14A1 — 115V to 24V Furnace Control Transformer | Ships Today?

Yes. This is the factory-specified OEM transformer for the ICP VNE075F14A1 — 115V to 24V Furnace Control Transformer | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the transformer on my ICP VNE075F14A1 — 115V to 24V Furnace Control Transformer | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Photo wiring connections. Step 3: Disconnect wires from old transformer. Step 4: Remove mounting hardware. Step 5: Install new transformer, reconnect wires matching voltage ratings. Step 6: Verify 24V output with multimeter.

My thermostat has no power. What failed?

Thermostat with no display = failed 24V transformer (or blown control board fuse). Check the 3A/5A fuse on the control board first ($1–$5 fix). If fuse is good but no 24V output from transformer, replace transformer.

Is this transformer compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP transformer?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu