ICP 40VA Transformer 208/230V to 24V for WPG3244060RKC1 — w/ Barrier | Ships Today

Overview

This OEM control transformer (PN 1173691) for the ICP/Tempstar/Heil WPG3244060RKC1 steps 208/230V line power down to 24V and supplies 40VA to the low-voltage control circuit that powers the thermostat, contactor coil, gas valve, and control board. The kit includes the matching 24V barrier (PN 1178431) that isolates and protects the low-voltage terminals. When a transformer fails — usually from a shorted secondary, an overloaded control circuit, or age — the entire 24V system goes dead: no thermostat display, no contactor pull-in, and no ignition. A blown transformer often points to a downstream short, so inspect the control wiring before energizing the replacement.

Specifications

Compatibility

Direct-fit OEM replacement for the ICP/Tempstar/Heil WPG3244060RKC1 packaged unit and Heil-family systems specifying a 40VA, 208/230V-to-24V control transformer with 24V barrier.

Installation Guide

1. Safety First — Disconnect power at the breaker and verify zero voltage at the transformer primary with a multimeter.
2. Access — Remove the control/electrical service panel.
3. Document — Photo the primary and secondary wiring and the barrier position before disconnecting.
4. Remove — Label and disconnect leads, then unscrew the old transformer and barrier from the mounting plate.
5. Install — Mount the new transformer and 24V barrier, match the 208/230V primary tap, and reconnect the 24V secondary per your photo.
6. Test — Restore power and confirm 24V at the secondary and normal thermostat/control operation.

Signs You Need a Replacement

• Dead thermostat — no display or call response
• Contactor coil and gas valve won't energize
• No 24V reading at the secondary terminals
• Burnt smell or visibly scorched transformer windings

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.