What amp contactor do I need for my ICP system?

The correct replacement for ICP model WCH3602GKR3 — 2-Pole 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WCH3602GKR3 — 2-Pole 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 40A Contactor for WCH3602GKR3 — 2-Pole 24V Coil | Ships Today

Name: ICP 40A Contactor for WCH3602GKR3 — 2-Pole 24V Coil | Ships Today
Brand: ICP
SKU: 1176763-GEN
Price: 32.95 USD
Availability: InStock

SKU: 1176763-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM 40-amp definite-purpose contactor (part #1176763) is the main switching relay for the ICP/Tempstar/Heil WCH3602GKR3 condensing unit. On a cooling call, the 24-volt coil closes the contacts and feeds line voltage to the compressor and condenser fan motor. Because the contacts carry full load current every cycle, they are a leading wear item — pitting, burning, and chatter cause hard starts, intermittent cooling, or a unit that hums but won't run. A new 40A contactor restores reliable, full-voltage switching to the compressor circuit.

Specifications

Spec	Value
Part Number	1176763
Type	Definite-Purpose Contactor
Brand	ICP / Tempstar / Heil
Contact Rating	40 Amps
Poles	2-Pole
Coil Voltage	24V
Fits Model	WCH3602GKR3

Compatibility

Direct OEM replacement for the ICP/Tempstar/Heil WCH3602GKR3 condensing unit, and a functional match for other ICP-family condensers using a 40A, 2-pole, 24V-coil contactor. Always verify amperage, pole count, and coil voltage against the existing part.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and breaker; verify zero voltage with a multimeter before touching wiring.
Access — Remove the condenser service panel to expose the electrical compartment.
Document — Photograph every wire and terminal before disconnecting.
Remove — Transfer line, load, and 24V coil wires one at a time, or unbolt the old contactor first and move wiring after.
Install — Mount the new contactor and reconnect each wire per your photo; tighten all terminal screws.
Test — Restore power, call for cooling, and confirm the coil pulls in and the compressor and fan start.

Signs You Need a Replacement

Burned, pitted, or welded contacts.
Humming or buzzing without compressor start.
Chattering or rapid clicking on a cooling call.
Intermittent cooling or starting only after tapping the contactor.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 40A Contactor for WCH3602GKR...

$32.95

Frequently Asked Questions

Does this Contactor fit my ICP WCH3602GKR3 — 2-Pole 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP WCH3602GKR3 — 2-Pole 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP WCH3602GKR3 — 2-Pole 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu