What amp contactor do I need for my ICP system?

The correct replacement for ICP model RGX060KECA0AAA — 2-Pole 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGX060KECA0AAA — 2-Pole 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 40A Contactor for RGX060KECA0AAA — 2-Pole 24V Coil | Ships Today

Name: ICP 40A Contactor for RGX060KECA0AAA — 2-Pole 24V Coil | Ships Today
Brand: ICP
SKU: 1176763-GEN
Price: 34.95 USD
Availability: InStock

SKU: 1176763-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the genuine OEM 40-amp definite purpose contactor (part #1176763) for the ICP/Heil/Tempstar RGX060KECA0AAA furnace. A contactor is an electrically operated switch that uses a low-voltage 24V control signal to close high-current line-voltage contacts, energizing the unit's load. When a contactor fails, the system may refuse to start, chatter or hum loudly, or run nonstop because the contacts have welded together. Pitted, burned, or carbon-fouled contacts are among the most common HVAC service issues. This 2-pole, 40A contactor restores positive, reliable switching.

Specifications

Spec	Value
Part Number	1176763
Type	Definite Purpose Contactor
Brand	ICP (Heil / Tempstar)
Poles	2-Pole
Contact Rating	40 Amps
Coil Voltage	24V
Fitment	OEM Replacement

Compatibility

Engineered as a direct OEM replacement for the ICP/Heil/Tempstar RGX060KECA0AAA. The 40A, 2-pole, 24V-coil configuration is shared across many ICP-family units that use the same switching specification — verify against your existing contactor before installing.

Installation Guide

Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter.
Access — Remove the service panel to expose the control compartment.
Document — Photograph all wire positions on the contactor before disconnecting.
Remove — Label and disconnect the line, load, and 24V coil wires, then unscrew the old contactor from its bracket.
Install — Mount the new contactor and reconnect each wire exactly as shown in your photo.
Test — Restore power, call for operation, and confirm the contactor pulls in cleanly with no chatter.

Signs You Need a Replacement

Unit will not start or starts intermittently
Loud humming, buzzing, or chattering from the contactor
Visible pitting, burning, or melted plastic on the contacts
System runs continuously because contacts are welded closed

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 40A Contactor for RGX060KECA...

$34.95

Frequently Asked Questions

Does this Contactor fit my ICP RGX060KECA0AAA — 2-Pole 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP RGX060KECA0AAA — 2-Pole 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP RGX060KECA0AAA — 2-Pole 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu