Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP 3-Pole Contactor for YE048F — 25A 24V Coil | Ships Today
ICP

ICP 3-Pole Contactor for YE048F — 25A 24V Coil | Ships Today

SKU: YE048F Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This is a genuine OEM three-pole definite purpose contactor (part number 14303002) for the ICP / Tempstar / Heil YE048F heat pump. Rated at 25 amps per pole with a 24-volt control coil, this contactor switches all three line connections to the compressor and condenser fan motor whenever the thermostat calls. Energizing the 24V coil pulls the contacts closed to pass power to the outdoor unit; releasing it opens all three poles. Over time the contacts pit, burn, or weld together and the coil can open or chatter. Typical failure symptoms include a humming outdoor unit that won't start, a compressor that runs even after the call ends because contacts are welded, visible arcing or carbon at the contacts, and rapid clicking from a weak coil.

Specifications

Spec Value
Part Number 14303002
Type Three-Pole (3P) Definite Purpose Contactor
Brand ICP / Tempstar / Heil
Contact Rating 25 Amps
Coil Voltage 24V
Poles 3
Fit OEM Replacement

Compatibility

Designed as the factory replacement for the ICP YE048F outdoor heat pump and shared across compatible ICP-family condensing units sold under the Heil, Tempstar, and Comfortmaker brands. Confirm your existing contactor is a 3-pole, 25A, 24V coil unit before ordering.

Installation Guide

  1. Safety First — Disconnect power at the outdoor disconnect and breaker, then verify zero voltage with a multimeter.
  2. Access — Remove the control panel cover on the condensing unit.
  3. Document — Photograph all wires and terminal positions before disconnecting anything.
  4. Remove — Label and disconnect the line, load, and 24V coil wires, then unscrew the old contactor from its bracket.
  5. Install — Mount the new contactor and reconnect each wire to the matching terminal per your photo.
  6. Test — Restore power and confirm the contacts pull in on a call and the compressor and fan run.

Signs You Need a Replacement

  • Outdoor unit hums but the compressor will not start
  • Pitted, burned, or welded contacts on inspection
  • Unit runs continuously and will not shut off
  • Chattering or rapid clicking when the coil is energized

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my ICP YE048F — 25A 24V Coil | Ships Today?
Yes. This is the factory-specified OEM contactor for the ICP YE048F — 25A 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my ICP YE048F — 25A 24V Coil | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online