Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP 3-Pole 25A Contactor for YE060F — 24V Coil | Ships Today
ICP

ICP 3-Pole 25A Contactor for YE060F — 24V Coil | Ships Today

SKU: YE060F Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This genuine OEM 3-pole definite purpose contactor (part number 14303002) is the primary switching relay for the ICP/Heil/Tempstar YE060F heat pump and air conditioning system. Rated at 25 amps with a 24-volt control coil, it energizes the compressor and condenser fan motor whenever the thermostat calls for cooling or heat-pump operation. When the coil receives 24V from the control circuit, the three sets of silver-alloy contacts close to pass line voltage to the load. Common failure symptoms include pitted or welded contacts that cause the unit to run continuously, chattering or buzzing from a worn coil, and a complete no-start condition when the contacts fail to close. Because the contactor carries full load current thousands of times per season, it is one of the most frequently replaced components on any condensing unit.

Specifications

Spec Value
Part Number 14303002
Type 3-Pole Definite Purpose Contactor
Brand ICP / Heil / Tempstar
Contact Rating 25 Amps
Coil Voltage 24 VAC
Poles 3
Fit OEM

Compatibility

Directly fits the ICP/Heil/Tempstar YE060F and many related Comfortmaker and Heil-built condensing units of the same tonnage. Always confirm your existing contactor matches 25A rating and 24V coil before installing.

Installation Guide

  1. Safety First — Disconnect power at the disconnect and breaker, verify zero voltage with a multimeter.
  2. Access — Remove the condenser service panel.
  3. Document — Photograph all line, load, and coil wires before disconnecting.
  4. Remove — Note wire positions, transfer one wire at a time, then unscrew the old contactor from its bracket.
  5. Install — Mount the new contactor and reconnect each wire to the matching terminal per your photo.
  6. Test — Restore power, call for cooling, and verify the contacts pull in and the compressor and fan start.

Signs You Need a Replacement

  • Compressor and fan run continuously even when the thermostat is satisfied (welded contacts).
  • Loud buzzing or chattering at the contactor when cooling is called.
  • Unit will not start and you read 24V at the coil but no line voltage passing through.
  • Visible burning, pitting, or arcing damage on the contact points.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my ICP YE060F — 24V Coil | Ships Today?
Yes. This is the factory-specified OEM contactor for the ICP YE060F — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my ICP YE060F — 24V Coil | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online