What amp contactor do I need for my ICP system?

The correct replacement for ICP model YE048H — 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number YE048H — 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 3-Pole 25A Contactor for YE048H — 24V Coil | Ships Today

Name: ICP 3-Pole 25A Contactor for YE048H — 24V Coil | Ships Today
Brand: ICP
SKU: YE048H
Price: 42.84 USD
Availability: InStock

SKU: YE048H Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM 3-pole definite purpose contactor (part number 14303002) is the main switching relay for the ICP/Heil/Tempstar YE048H heat pump and air conditioning system. Rated at 25 amps with a 24-volt control coil, it energizes the compressor and condenser fan motor each time the thermostat calls for cooling or heat-pump operation. When 24V reaches the coil, the three sets of silver-alloy contacts close and pass line voltage to the load. Typical failures include pitted or welded contacts that make the unit run nonstop, a buzzing or chattering coil, and a no-start condition when the contacts fail to close. Switching full load current thousands of cycles per season, the contactor is one of the most commonly replaced parts on any outdoor condensing unit.

Specifications

Spec	Value
Part Number	14303002
Type	3-Pole Definite Purpose Contactor
Brand	ICP / Heil / Tempstar
Contact Rating	25 Amps
Coil Voltage	24 VAC
Poles	3
Fit	OEM

Compatibility

Directly fits the ICP/Heil/Tempstar YE048H and related Comfortmaker and Heil-built condensing units of the same tonnage. Confirm your existing contactor is rated 25A with a 24V coil before installing.

Installation Guide

Safety First — Disconnect power at the disconnect and breaker, verify zero voltage with a multimeter.
Access — Remove the condenser service panel.
Document — Photograph all line, load, and coil wires before disconnecting.
Remove — Transfer one wire at a time, then unscrew the old contactor from its bracket.
Install — Mount the new contactor and reconnect each wire to the matching terminal per your photo.
Test — Restore power, call for cooling, and verify the contacts pull in and the compressor and fan start.

Signs You Need a Replacement

Compressor and fan run continuously even after the thermostat is satisfied (welded contacts).
Loud buzzing or chattering at the contactor on a cooling call.
Unit won't start with 24V present at the coil but no line voltage passing through.
Visible burning, pitting, or arcing on the contact points.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 3-Pole 25A Contactor for YE0...

$42.84

Frequently Asked Questions

Does this Contactor fit my ICP YE048H — 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP YE048H — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP YE048H — 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu