What amp contactor do I need for my ICP system?

The correct replacement for ICP model YE036H — 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number YE036H — 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 3-Pole 25A Contactor for YE036H — 24V Coil | Ships Today

Name: ICP 3-Pole 25A Contactor for YE036H — 24V Coil | Ships Today
Brand: ICP
SKU: YE036H-GEN
Price: 29.95 USD
Availability: InStock

SKU: YE036H-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM three-pole (3P) 25 amp definite purpose contactor with a 24-volt coil (part number 14303002) for the ICP / Tempstar / Heil YE036H condensing unit. The contactor is the high-voltage switch that energizes the compressor and condenser fan. When the thermostat calls for cooling, 24VAC energizes the contactor coil and pulls all three sets of contacts closed to feed line voltage to the outdoor unit.

Contactors wear out because the contacts arc and pit on every cycle. Typical failure symptoms include a humming contactor that will not pull in, contacts welded closed so the unit runs continuously, burned or pitted contact faces, or an open 24V coil that keeps the system from starting.

Specifications

Spec	Value
Part Number	14303002
Type	Definite Purpose Contactor
Brand	ICP / Tempstar / Heil
Poles	3 (Three-Pole)
Contact Rating	25 Amps
Coil Voltage	24 VAC
Fitment	OEM

Compatibility

Direct OEM replacement for the ICP/Tempstar/Heil YE036H and shared-platform Comfortmaker/Day & Night condensers using a 25A three-pole contactor with a 24V coil. Verify pole count, amp rating, and coil voltage against your existing contactor before installing.

Installation Guide

Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage at the contactor with a multimeter.
Access — Remove the condenser service panel.
Document — Photograph every wire and terminal before disconnecting.
Remove — Label and disconnect the line, load, and 24V coil leads, then unscrew the old contactor from the bracket.
Install — Mount the new contactor and reconnect every wire exactly per your photo.
Test — Restore power and confirm the contactor pulls in on a cooling call and the compressor and fan energize.

Signs You Need a Replacement

Loud hum or buzz but the contactor will not pull in
Outdoor unit runs nonstop (contacts welded closed)
Visibly burned, pitted, or melted contacts
No 24V continuity through the coil

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 3-Pole 25A Contactor for YE0...

$29.95

Frequently Asked Questions

Does this Contactor fit my ICP YE036H — 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP YE036H — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP YE036H — 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu