What amp contactor do I need for my ICP system?

The correct replacement for ICP model YG060GB1 — 40A 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number YG060GB1 — 40A 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 2-Pole Contactor for YG060GB1 — 40A 24V Coil | Ships Today

Name: ICP 2-Pole Contactor for YG060GB1 — 40A 24V Coil | Ships Today
Brand: ICP
SKU: 1059574-GEN
Price: 32.00 USD
Availability: InStock

SKU: 1059574-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM 2-pole definite purpose contactor (part #1059574) is the main switching relay for your ICP Tempstar/Heil YG060GB1 heat pump. Rated at 40 amps with a 24V control coil, it closes when the thermostat calls for operation, sending line voltage to the compressor and condenser fan motor. The contacts endure constant high-current arcing and eventually pit, burn, or weld, while the coil can weaken and fail to pull in. A bad contactor is a leading cause of no-cool and no-heat service calls — you may hear a humming or chattering outdoor unit, find a compressor that will not start, or discover contacts welded closed so the unit never shuts off.

Specifications

Spec	Value
Part Number	1059574
Type	Definite Purpose Contactor
Poles	2-Pole
Contact Rating	40 Amps
Coil Voltage	24V
Brand	ICP (Tempstar / Heil / Comfortmaker)
Fitment	OEM

Compatibility

Direct OEM replacement for the ICP YG060GB1 and related Tempstar, Heil, and Comfortmaker condensing units and heat pumps that use a 2-pole 40A 24V contactor. Verify amp rating, pole count, and coil voltage against your existing contactor before installing.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and breaker, then verify zero voltage at the contactor terminals with a multimeter.
Access — Remove the condenser service/electrical panel.
Document — Photograph all line, load, and 24V coil wiring before disconnecting.
Remove — Label and disconnect the wires, then unscrew the old contactor from its bracket.
Install — Mount the new contactor and reconnect each wire exactly per your photo (L1/L2 line, T1/T2 load, 24V to coil terminals).
Test — Restore power, call for operation, and confirm the contactor pulls in cleanly and the compressor and fan start.

Signs You Need a Replacement

Outdoor unit hums or buzzes but the compressor will not start
Loud chattering or rapid clicking at the contactor
Burnt, pitted, or welded contacts on inspection
Compressor runs continuously because contacts are stuck closed

Shipping & Returns

Ships same day before 3 PM CST. 30-day hassle-free returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 2-Pole Contactor for YG060GB...

$32.00

Frequently Asked Questions

Does this Contactor fit my ICP YG060GB1 — 40A 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP YG060GB1 — 40A 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP YG060GB1 — 40A 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu