Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP 2-Pole Contactor for RGS150HFCB0AAAA — 30A/40A 24V Coil | Ships Today
ICP

ICP 2-Pole Contactor for RGS150HFCB0AAAA — 30A/40A 24V Coil | Ships Today

SKU: 1178074-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This OEM 2-pole definite-purpose contactor is the electrical switch that energizes the compressor and condenser fan motor in your ICP / Tempstar / Heil RGS150HFCB0AAAA furnace and matched cooling equipment. When the thermostat calls for cooling, the 24V control coil pulls the contacts closed, sending line voltage to the load. We stock both the 30A (OEM 1178074) and 40A (OEM 1178211) versions so you can match the exact rating originally installed. Failure symptoms include a buzzing or chattering contactor, pitted or welded contacts, a system that won't start, or contacts that stick closed and keep the unit running. The 24V coil is the most common failure point and is easily verified with a multimeter.

Specifications

Spec Value
Part Number 1178074 (30A) / 1178211 (40A)
Type 2-Pole Definite Purpose Contactor
Brand ICP (Tempstar / Heil)
Contact Rating 30A or 40A
Coil Voltage 24 VAC
Poles 2
Fitment OEM

Compatibility

Directly fits the ICP/Tempstar/Heil RGS150HFCB0AAAA and the cooling equipment matched to it. Confirm the amp rating stamped on your original contactor before ordering — choose 30A for lighter condensing units and 40A for higher-capacity systems.

Installation Guide

  1. Safety First — Disconnect power at the disconnect and breaker; verify zero voltage with a multimeter.
  2. Access — Remove the electrical access service panel.
  3. Document — Photograph all wire positions on the line and load sides before disconnecting.
  4. Remove — Label and disconnect each wire, then unscrew the old contactor from the bracket.
  5. Install — Mount the new contactor and reconnect each wire to the matching terminal per your photo.
  6. Test — Restore power and confirm the contacts pull in on a cooling call and that the compressor and fan energize.

Signs You Need a Replacement

  • Loud buzzing, humming, or chattering from the contactor
  • Burned, pitted, or welded contacts
  • System fails to start or runs continuously (stuck contacts)
  • Coil reads open or shorted on a multimeter

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my ICP RGS150HFCB0AAAA — 30A/40A 24V Coil | Ships Today?
Yes. This is the factory-specified OEM contactor for the ICP RGS150HFCB0AAAA — 30A/40A 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my ICP RGS150HFCB0AAAA — 30A/40A 24V Coil | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online