What amp contactor do I need for my ICP system?

The correct replacement for ICP model YK060G2 — 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number YK060G2 — 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 2-Pole 40A Contactor for YK060G2 — 24V Coil | Ships Today

Name: ICP 2-Pole 40A Contactor for YK060G2 — 24V Coil | Ships Today
Brand: ICP
SKU: YK060G2-GEN
Price: 32.95 USD
Availability: InStock

SKU: YK060G2-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

The ICP 1059574 is the OEM 2-pole, 40-amp contactor with a 24V coil for the Tempstar/Heil YK060G2 condensing unit. The contactor is the high-voltage switch that energizes the compressor and outdoor fan whenever the 24V thermostat circuit calls. Over time the contact points pit, burn, or weld, and the coil can fail open. Symptoms include a unit that won't start, that hums but won't engage, or that won't shut off because the contacts are welded closed. This 40A / 24V contactor is a direct OEM-fit replacement.

Specifications

Spec	Value
Part Number	1059574
Type	2-Pole Contactor
Brand	ICP (Tempstar / Heil)
Contact Rating	40A
Coil Voltage	24V
Poles	2
Application	Compressor / Condenser Fan Switching
Fit	OEM Direct Replacement

Compatibility

Fits the ICP / Tempstar / Heil YK060G2 and other ICP-family condensing units using a 2-pole 40A 24V-coil contactor (part 1059574). Verify pole count, amp rating, and coil voltage against your existing contactor before ordering.

Installation Guide

Safety First — Disconnect power at the disconnect and breaker; verify zero voltage with a multimeter.
Access — Remove the condenser unit control panel.
Document — Photograph all line, load, and 24V coil wiring before disconnecting.
Remove — Transfer wires one at a time or label each, then unscrew the old contactor from its bracket.
Install — Mount the new 1059574 contactor, reconnect each lead exactly per your photos, and torque terminals snug.
Test — Restore power and confirm the contactor pulls in on a call and drops out cleanly when satisfied.

Signs You Need a Replacement

Unit hums but compressor and fan won't start.
Pitted, burned, or welded contact points.
Unit won't shut off because contacts are stuck closed.
24V coil reads open and won't pull the contactor in.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 2-Pole 40A Contactor for YK0...

$32.95

Frequently Asked Questions

Does this Contactor fit my ICP YK060G2 — 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP YK060G2 — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP YK060G2 — 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu