What amp contactor do I need for my ICP system?

The correct replacement for ICP model YG060GC1 — 24V Coil OEM | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number YG060GC1 — 24V Coil OEM | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 2-Pole 40A Contactor for YG060GC1 — 24V Coil OEM | Ships Today

Name: ICP 2-Pole 40A Contactor for YG060GC1 — 24V Coil OEM | Ships Today
Brand: ICP
SKU: YG060GC1-GEN
Price: 32.95 USD
Availability: InStock

SKU: YG060GC1-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM 2-pole, 40 amp definite purpose contactor (part #1059574) is a genuine ICP replacement for the YG060GC1 heat pump. The contactor is the high-voltage relay that energizes the compressor and condenser fan whenever the 24-volt control circuit calls for it. Its 24V coil pulls the contacts closed; pitted, welded, or chattering contacts are one of the most common causes of a no-start or a unit that won't shut off. Replacing a worn contactor restores clean, reliable switching and protects downstream components from voltage drop and arcing.

Specifications

Spec	Value
Part Number	1059574
Type	Definite Purpose Contactor, 2-Pole
Brand	ICP / Tempstar / Heil
Rating	40 Amps
Coil Voltage	24 VAC
Poles	2
Fits Model	YG060GC1

Compatibility

Engineered for the ICP / Tempstar / Heil YG060GC1 heat pump and matching condensing units. This OEM contactor matches the factory amp rating, coil voltage, and pole configuration. Confirm the coil voltage and amp rating against your existing part before installing.

Installation Guide

Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter.
Access — Remove the service panel on the condensing unit.
Document — Photograph all line, load, and 24V coil wires before disconnecting.
Remove — Pull the wires, unscrew the contactor from its mounting plate, and lift it out.
Install — Mount the new contactor, reconnect every wire to the matching terminal per your photo, and torque the lugs.
Test — Restore power, call for cooling/heating, and confirm the contactor pulls in cleanly without chatter.

Signs You Need a Replacement

Burned, pitted, or welded contacts.
Loud buzzing or chattering when the unit is called.
Compressor and fan fail to start despite a 24V signal.
Unit continues running after the thermostat is satisfied.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 2-Pole 40A Contactor for YG0...

$32.95

Frequently Asked Questions

Does this Contactor fit my ICP YG060GC1 — 24V Coil OEM | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP YG060GC1 — 24V Coil OEM | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP YG060GC1 — 24V Coil OEM | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu