What amp contactor do I need for my ICP system?

The correct replacement for ICP model YG060GA2 — 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number YG060GA2 — 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 2-Pole 40A Contactor for YG060GA2 — 24V Coil | Ships Today

Name: ICP 2-Pole 40A Contactor for YG060GA2 — 24V Coil | Ships Today
Brand: ICP
SKU: 1059574
Price: 38.94 USD
Availability: InStock

SKU: 1059574 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the genuine OEM 2-pole, 40-amp contactor (part #1059574) for the ICP/Heil/Tempstar YG060GA2. The contactor is the high-voltage switch that powers up your condensing unit. When the thermostat calls for cooling or heating, the 24V coil pulls the contacts closed and sends line voltage to the compressor and condenser fan motor. Contactors are one of the most common failure points in an outdoor unit: the silver contacts pit, burn, and weld from the constant high-amperage arcing, and the 24V coil can burn open. A failing contactor causes hard starts, chattering, a unit that won't start, or — when contacts weld shut — a unit that won't shut off. This is a 2-pole switch rated at 40A with a 24V control coil.

Specifications

Spec	Value
Part Number	1059574
Type	Definite Purpose Contactor
Poles	2
Contact Rating	40A
Coil Voltage	24V
Brand	ICP / Heil / Tempstar / Comfortmaker
Fit	OEM Direct Replacement

Compatibility

Direct-fit replacement for the ICP/Heil/Tempstar YG060GA2 condensing unit and other International Comfort Products units calling for a 2-pole 40A contactor with a 24V coil. Match poles (2), amp rating (40A), and coil voltage (24V) to your existing contactor before ordering.

Installation Guide

Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter. Discharge the run capacitor.
Access — Remove the electrical access panel on the condensing unit.
Document — Photograph every line, load, and 24V coil wire before disconnecting.
Remove — Unscrew the old contactor from its bracket and transfer wires one at a time, or label each lead.
Install — Mount the new contactor and reconnect each wire to the matching terminal per your photos.
Test — Restore power, call for cooling, and confirm the contactor pulls in cleanly and the compressor and fan start.

Signs You Need a Replacement

Outdoor unit hums or chatters but won't start.
Burnt, pitted, or welded contacts visible on the old part.
Unit won't shut off (contacts stuck closed).
24V coil reads open and won't pull the contacts in.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 2-Pole 40A Contactor for YG0...

$38.94

Frequently Asked Questions

Does this Contactor fit my ICP YG060GA2 — 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP YG060GA2 — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP YG060GA2 — 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu