ICP 2-Pole 40A Contactor for YG060GA2 — 24V Coil | Ships Today

Overview

This is the genuine OEM 2-pole, 40-amp contactor (part #1059574) for the ICP/Heil/Tempstar YG060GA2. The contactor is the high-voltage switch that powers up your condensing unit. When the thermostat calls for cooling or heating, the 24V coil pulls the contacts closed and sends line voltage to the compressor and condenser fan motor. Contactors are one of the most common failure points in an outdoor unit: the silver contacts pit, burn, and weld from the constant high-amperage arcing, and the 24V coil can burn open. A failing contactor causes hard starts, chattering, a unit that won't start, or — when contacts weld shut — a unit that won't shut off. This is a 2-pole switch rated at 40A with a 24V control coil.

Specifications

Compatibility

Direct-fit replacement for the ICP/Heil/Tempstar YG060GA2 condensing unit and other International Comfort Products units calling for a 2-pole 40A contactor with a 24V coil. Match poles (2), amp rating (40A), and coil voltage (24V) to your existing contactor before ordering.

Installation Guide

1. Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter. Discharge the run capacitor.
2. Access — Remove the electrical access panel on the condensing unit.
3. Document — Photograph every line, load, and 24V coil wire before disconnecting.
4. Remove — Unscrew the old contactor from its bracket and transfer wires one at a time, or label each lead.
5. Install — Mount the new contactor and reconnect each wire to the matching terminal per your photos.
6. Test — Restore power, call for cooling, and confirm the contactor pulls in cleanly and the compressor and fan start.

Signs You Need a Replacement

• Outdoor unit hums or chatters but won't start.
• Burnt, pitted, or welded contacts visible on the old part.
• Unit won't shut off (contacts stuck closed).
• 24V coil reads open and won't pull the contacts in.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.