What amp contactor do I need for my ICP system?

The correct replacement for ICP model RHS048H0BB0AAAA | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RHS048H0BB0AAAA | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 2-Pole 30A Contactor with 24V Coil for RHS048H0BB0AAAA | Ships Today

Name: ICP 2-Pole 30A Contactor with 24V Coil for RHS048H0BB0AAAA | Ships Today
Brand: ICP
SKU: 1178074-GEN
Price: 26.00 USD
Availability: InStock

SKU: 1178074-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

The OEM 1178074 is a 2-pole, 30-amp definite purpose contactor with a 24-volt coil for the ICP/Heil/Tempstar RHS048H0BB0AAAA. It is the high-voltage relay that switches line power to the compressor and condenser fan whenever the thermostat sends a 24V signal to the coil. Contactor failure is one of the most common no-cool service calls: pitted or welded contacts, a chattering coil, or contacts that won't pull in all leave the outdoor unit dead or buzzing. The 30A rating and 24V coil make this a direct OEM-spec replacement.

Specifications

Spec	Value
Part Number	1178074
Type	Definite Purpose Contactor
Poles	2-Pole
Contact Rating	30 Amps
Coil Voltage	24V
Brand	ICP (Heil / Tempstar / Comfortmaker)
Fitment	OEM Direct Replacement

Compatibility

Direct OEM fit for the RHS048H0BB0AAAA and other ICP-family condensing/packaged units calling for a 2-pole 30A contactor with a 24V coil. Confirm pole count, amp rating, and coil voltage match your old contactor.

Installation Guide

Safety First – Disconnect power at the disconnect and breaker; verify zero voltage with a multimeter.
Access – Remove the service panel to expose the contactor in the control box.
Document – Photograph every line, load, and 24V coil connection before disconnecting.
Remove – Move wires one at a time to the new contactor, or label them, then unscrew the old contactor from its mount.
Install – Mount the new contactor, transfer line/load leads to the matching poles, and connect the 24V leads to the coil terminals per your photo.
Test – Restore power and confirm the contactor pulls in cleanly on a cooling call with no chatter.

Signs You Need a Replacement

Outdoor unit hums or buzzes but won't start.
Pitted, burned, or welded contacts.
Coil won't pull the contacts in on a 24V signal.
Intermittent compressor/fan operation from dirty contacts.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 2-Pole 30A Contactor with 24...

$26.00

Frequently Asked Questions

Does this Contactor fit my ICP RHS048H0BB0AAAA | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP RHS048H0BB0AAAA | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP RHS048H0BB0AAAA | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu