What amp contactor do I need for my ICP system?

The correct replacement for ICP model RHS072L0BB0AAAA — 24V Coil OEM 1178074 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RHS072L0BB0AAAA — 24V Coil OEM 1178074 | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 2-Pole 30A Contactor for RHS072L0BB0AAAA — 24V Coil OEM 1178074 | Ships Today

Name: ICP 2-Pole 30A Contactor for RHS072L0BB0AAAA — 24V Coil OEM 1178074 | Ships Today
Brand: ICP
SKU: 1178074-GEN
Price: 32.95 USD
Availability: InStock

SKU: 1178074-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM 2-pole, 30-amp definite-purpose contactor (ICP part 1178074) is the factory switching relay for the RHS072L0BB0AAAA package heat pump. Its 24V control coil pulls in the contacts to feed line voltage to the compressor and condenser fan whenever the thermostat calls. Contactors fail from arcing, pitted or welded contacts, and burnt coils — leaving the unit dead or unable to shut off.

Specifications

Spec	Value
OEM Part Number	1178074
Description	Contactor, 2-Pole, 30A, 24V Coil
Type	Definite Purpose Contactor
Poles	2
Contact Rating	30A
Coil Voltage	24V
Brand	ICP / Tempstar / Heil
Fits Model	RHS072L0BB0AAAA

Compatibility

Direct factory replacement for the ICP RHS072L0BB0AAAA package heat pump and shared ICP-family platforms (Tempstar, Heil, Comfortmaker, Arcoaire). Match poles (2), contact amperage (30A), and coil voltage (24V) to your existing contactor before installing.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter.
Access — Remove the condenser control panel.
Document — Photograph every line, load, and 24V coil connection before disconnecting.
Remove — Transfer wires one at a time, or label them, then unscrew the old contactor from the bracket.
Install — Mount the new contactor and reconnect each lead exactly per your photo.
Test — Restore power and confirm the contactor pulls in on a call and drops out cleanly.

Signs You Need a Replacement

Buzzing or chattering from the contactor on a cooling/heating call
Pitted, blackened, or welded contacts
Unit won't start, or won't shut off after the call ends
Open or burnt 24V coil reading

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 2-Pole 30A Contactor for RHS...

$32.95

Frequently Asked Questions

Does this Contactor fit my ICP RHS072L0BB0AAAA — 24V Coil OEM 1178074 | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP RHS072L0BB0AAAA — 24V Coil OEM 1178074 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP RHS072L0BB0AAAA — 24V Coil OEM 1178074 | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu