Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP 2-Pole 30A Contactor for RHS072H0BB0AAAA – 24V Coil | Ships Today
ICP

ICP 2-Pole 30A Contactor for RHS072H0BB0AAAA – 24V Coil | Ships Today

SKU: 1178074-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This OEM 2-pole definite purpose contactor (part number 1178074) is the switching relay that energizes the compressor and condenser fan motor in your ICP RHS072H0BB0AAAA heat pump. Rated for 30 amps per pole with a 24-volt control coil, it closes when the thermostat calls for cooling, passing line voltage to the outdoor unit. Contactors are a high-wear component: the contacts arc every time they cycle, and over thousands of cycles they pit, burn, or weld shut. Common failure symptoms include an outdoor unit that won't start, a loud chattering or buzzing hum, contacts that stick closed so the compressor never shuts off, or visible burning and pitting on the contact faces.

Specifications

Spec Value
Part Number 1178074
Type Definite Purpose Contactor
Brand ICP (Tempstar / Heil / Comfortmaker)
Poles 2-Pole
Contact Rating 30 Amps
Coil Voltage 24V

Compatibility

Directly fits the ICP RHS072H0BB0AAAA and is shared across many ICP-family condensers and heat pumps sold under the Tempstar, Heil, Comfortmaker, Arcoaire, and KeepRite brands that use a 2-pole 30A / 24V coil contactor. Always confirm your existing contactor is 2-pole with a 24V coil before ordering.

Installation Guide

  1. Safety First – Disconnect power at the outdoor disconnect and breaker, then verify zero voltage with a multimeter across the line terminals.
  2. Access – Remove the condenser service panel to expose the electrical compartment.
  3. Document – Photograph every wire and terminal position before disconnecting anything.
  4. Remove – Note the line, load, and 24V coil wire locations, then transfer wires one at a time to the new contactor and unscrew the old unit from its bracket.
  5. Install – Mount the new contactor, reconnect each wire per your photo, and confirm the 24V coil leads are landed correctly.
  6. Test – Restore power, call for cooling, and verify the contactor pulls in cleanly and the compressor and fan start.

Signs You Need a Replacement

  • Outdoor unit won't start or hums but won't engage
  • Loud buzzing, chattering, or clicking at the contactor
  • Pitted, burned, or melted contact surfaces
  • Compressor runs continuously because contacts are welded shut

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my ICP RHS072H0BB0AAAA – 24V Coil | Ships Today?
Yes. This is the factory-specified OEM contactor for the ICP RHS072H0BB0AAAA – 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my ICP RHS072H0BB0AAAA – 24V Coil | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online