Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP 2-Pole 30A Contactor for RHS060H0XB0AAAA — 24V Coil | Ships Today
ICP

ICP 2-Pole 30A Contactor for RHS060H0XB0AAAA — 24V Coil | Ships Today

SKU: 1178074-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This is a genuine OEM 2-pole, 30-amp contactor (part 1178074) with a 24V coil for the ICP / Heil / Tempstar model RHS060H0XB0AAAA. The contactor is the line-voltage switch that powers the compressor and outdoor fan motor each time the thermostat calls for cooling. A 24V signal energizes the coil, which closes both poles of contacts to feed line voltage to the condenser. As a two-pole design, it breaks both legs of the incoming power for safer, cleaner switching. Contactors are high-cycle wear parts — repeated arcing slowly pits and burns the contacts until the unit hard-starts, buzzes, chatters, or fails to energize at all. Replacing a worn 30A contactor restores quiet, dependable cooling cycles.

Specifications

Spec Value
Part Number 1178074
Type Definite Purpose Contactor
Brand ICP (Heil / Tempstar / Comfortmaker)
Current Rating 30 Amps
Poles 2-Pole
Coil Voltage 24V
Application Condenser / Heat Pump

Compatibility

Designed as the factory replacement for ICP model RHS060H0XB0AAAA and used across many Heil, Tempstar, Comfortmaker, and Arcoaire condensing units that call for a 2-pole, 30A, 24V-coil contactor. Verify amperage, pole count, and coil voltage against the original before installing.

Installation Guide

  1. Safety First — Disconnect power at the outdoor disconnect and breaker, then verify zero voltage with a multimeter.
  2. Access — Remove the condenser service/electrical panel.
  3. Document — Photograph every wire and terminal before disconnecting.
  4. Remove — Label and pull the line, load, and 24V coil wires, then unbolt the old contactor from the bracket.
  5. Install — Mount the new 2-pole contactor and reconnect each wire to its matching terminal per your photo.
  6. Test — Restore power, call for cooling, and confirm both poles pull in and the unit starts cleanly.

Signs You Need a Replacement

  • Buzzing, humming, or chattering at the outdoor unit
  • Pitted, burned, or welded contact points
  • Compressor or fan won't start or cycles erratically
  • Unit keeps running after the thermostat is satisfied

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my ICP RHS060H0XB0AAAA — 24V Coil | Ships Today?
Yes. This is the factory-specified OEM contactor for the ICP RHS060H0XB0AAAA — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my ICP RHS060H0XB0AAAA — 24V Coil | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online