What amp contactor do I need for my ICP system?

The correct replacement for ICP model RHH090L0BA0AAAA — 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RHH090L0BA0AAAA — 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 2-Pole 30A Contactor for RHH090L0BA0AAAA — 24V Coil | Ships Today

Name: ICP 2-Pole 30A Contactor for RHH090L0BA0AAAA — 24V Coil | Ships Today
Brand: ICP
SKU: 1178074-GEN
Price: 29.00 USD
Availability: InStock

SKU: 1178074-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM 2-pole, 30-amp contactor (PN 1178074) is the genuine replacement for the ICP Tempstar Heil RHH090L0BA0AAAA heat pump. The contactor is an electrically operated switch with a 24V coil that energizes the compressor and condenser fan when the thermostat calls for cooling or heat-pump operation. Over time the contact points pit, weld, or burn — causing the unit to fail to start, run continuously, or hum without engaging. Replacing a worn contactor is one of the most common and inexpensive HVAC repairs.

Specifications

Spec	Value
Part Number	1178074
Type	Definite Purpose Contactor
Brand	ICP (Tempstar / Heil)
Poles	2-Pole
Rating	30 Amp
Coil Voltage	24V
Application	Compressor / Condenser Fan

Compatibility

Built for the ICP / Tempstar / Heil RHH090L0BA0AAAA heat pump and other Comfortmaker, Heil, and Tempstar condensing units using a 2-pole 30A 24V definite-purpose contactor. Confirm the OEM part number and physical footprint before ordering.

Installation Guide

Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter.
Access — Remove the condensing unit's service panel.
Document — Photograph every wire on the line, load, and coil terminals before disconnecting.
Remove — Move wires one at a time to the new contactor, then unbolt the old unit from the bracket.
Install — Mount the new contactor and reconnect all leads exactly per your photo.
Test — Restore power and confirm the contactor pulls in and the compressor/fan start on a cooling call.

Signs You Need a Replacement

Compressor and fan won't start despite a cooling call
Loud humming or buzzing from the contactor
Pitted, burned, or welded contact points
Unit runs nonstop because contacts are stuck closed

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 2-Pole 30A Contactor for RHH...

$29.00

Frequently Asked Questions

Does this Contactor fit my ICP RHH090L0BA0AAAA — 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP RHH090L0BA0AAAA — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP RHH090L0BA0AAAA — 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu