What amp contactor do I need for my ICP system?

The correct replacement for ICP model RHH090H0BA0AAAA — 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RHH090H0BA0AAAA — 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 2-Pole 30A Contactor for RHH090H0BA0AAAA — 24V Coil | Ships Today

Name: ICP 2-Pole 30A Contactor for RHH090H0BA0AAAA — 24V Coil | Ships Today
Brand: ICP
SKU: 1178074-GEN
Price: 24.95 USD
Availability: InStock

SKU: 1178074-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM 2-pole definite purpose contactor (part number 1178074) for the ICP / Tempstar / Heil RHH090H0BA0AAAA heat pump. Rated for 30 amps with a 24-volt control coil, the contactor is the electromechanical switch that closes the high-voltage circuit to the compressor and condenser fan motor whenever the thermostat calls for cooling or heating. When the 24V coil energizes, it pulls the contacts closed and sends line voltage to the outdoor unit. A failed contactor is one of the most common reasons an outdoor unit won't start, hums without running, or short-cycles. Pitted, burned, or welded contacts cause intermittent operation, chattering, and eventual compressor failure.

Specifications

Spec	Value
Part Number	1178074
Type	Definite Purpose Contactor
Brand	ICP
Poles	2-Pole
Contact Rating	30 Amps
Coil Voltage	24V
Fit	OEM Replacement

Compatibility

Designed for the ICP/Tempstar/Heil RHH090H0BA0AAAA and other ICP-family heat pump and condensing units using a 2-pole 30A 24V coil contactor. Always confirm pole count, amp rating, and coil voltage against the contactor you are removing.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and breaker, then verify zero voltage with a multimeter.
Access — Remove the electrical panel cover on the condensing unit.
Document — Photograph all line and load wiring plus the 24V coil leads before disconnecting.
Remove — Note wire positions, disconnect each lead, and unscrew the old contactor from the bracket.
Install — Mount the new contactor and reconnect every wire to the matching terminal per your photo.
Test — Restore power and confirm the contacts pull in on a thermostat call and the unit starts cleanly.

Signs You Need a Replacement

Outdoor unit hums or buzzes but the compressor and fan won't start
Burned, pitted, or welded-together contacts
Unit short-cycles or runs intermittently
Loud chattering at the contactor when cooling is called

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 2-Pole 30A Contactor for RHH...

$24.95

Frequently Asked Questions

Does this Contactor fit my ICP RHH090H0BA0AAAA — 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP RHH090H0BA0AAAA — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP RHH090H0BA0AAAA — 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu