Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP 2-Pole 30A Contactor for RHH048H0XA0AAAA — 24V Coil | Ships Today
ICP

ICP 2-Pole 30A Contactor for RHH048H0XA0AAAA — 24V Coil | Ships Today

SKU: 1178074-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This is a genuine OEM 2-pole, 30-amp definite purpose contactor (OEM part #1178074) for the ICP / Tempstar / Heil RHH048H0XA0AAAA heat pump. The contactor is the electrically operated switch that energizes the compressor and condenser fan motor whenever the thermostat calls for cooling or heating. A 24V control signal pulls in the coil, closing the two line-voltage poles and powering the outdoor unit. Contacts are rated for 30A continuous duty. Common failure symptoms include a unit that won't start, chattering or buzzing at the outdoor unit, pitted or welded contacts that keep the compressor running, or a clicking relay that never closes the circuit.

Specifications

Spec Value
Part Number 1178074
Type Definite Purpose Contactor
Brand ICP (Tempstar / Heil)
Poles 2-Pole
Contact Rating 30 Amps
Coil Voltage 24 VAC
Fit OEM Replacement

Compatibility

Directly fits the ICP / Tempstar / Heil RHH048H0XA0AAAA condensing unit and many other ICP-family heat pumps and air conditioners that use a 2-pole, 30A, 24V definite purpose contactor. Always confirm pole count, amp rating, and coil voltage against the failed part before installing.

Installation Guide

  1. Safety First — Disconnect power at the outdoor disconnect and the breaker, then verify zero voltage with a multimeter.
  2. Access — Remove the electrical access panel on the condensing unit.
  3. Document — Photograph all wire positions on the line and load sides before disconnecting anything.
  4. Remove — Move wires one at a time to the new contactor, or label them; unscrew the old contactor from the bracket.
  5. Install — Mount the new contactor, transfer the 24V coil wires and line/load conductors exactly per your photo, and tighten all terminals.
  6. Test — Restore power, call for cooling, and confirm the contactor pulls in cleanly and the compressor and fan energize.

Signs You Need a Replacement

  • Outdoor unit hums or buzzes but will not start.
  • Visibly pitted, burned, or welded contacts.
  • Compressor keeps running after the thermostat is satisfied (stuck closed).
  • Audible clicking with no contact closure (open or weak coil).

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my ICP RHH048H0XA0AAAA — 24V Coil | Ships Today?
Yes. This is the factory-specified OEM contactor for the ICP RHH048H0XA0AAAA — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my ICP RHH048H0XA0AAAA — 24V Coil | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online