What amp contactor do I need for my ICP system?

The correct replacement for ICP model RHH036S0XA0AAAA — 24V Coil 30 Amp | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RHH036S0XA0AAAA — 24V Coil 30 Amp | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP 2-Pole 30A Contactor for RHH036S0XA0AAAA — 24V Coil 30 Amp | Ships Today

Name: ICP 2-Pole 30A Contactor for RHH036S0XA0AAAA — 24V Coil 30 Amp | Ships Today
Brand: ICP
SKU: 1178074-GEN
Price: 27.95 USD
Availability: InStock

SKU: 1178074-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM 2-pole 30-amp definite-purpose contactor (ICP part 1178074) is the main switching relay for the ICP / Heil / Tempstar RHH036S0XA0AAAA condensing unit. Its 24V coil pulls in two sets of power contacts that feed the compressor and condenser fan whenever the thermostat calls. Over thousands of cycles the contacts pit, weld, or burn, and the coil can open — producing a humming unit that will not start, a chattering contactor, or a compressor that runs without cooling. Replacing the contactor is one of the most common and effective fixes for a no-cool condenser.

Specifications

Spec	Value
Part Number	1178074
Type	Definite-Purpose Contactor, 2-Pole
Brand	ICP (Heil / Tempstar / Comfortmaker)
Contact Rating	30 Amp
Coil Voltage	24V
Poles	2
Fit	OEM direct replacement

Compatibility

Designed for the ICP / Heil / Tempstar RHH036S0XA0AAAA and other ICP-family condensing units specifying a 2-pole 30A 24V contactor. Confirm pole count and coil voltage against your existing part.

Installation Guide

Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter.
Access — Remove the control-compartment service panel.
Document — Photograph all line, load, and 24V coil wiring before disconnecting.
Remove — Label and remove the wires, unscrew the old contactor from its bracket.
Install — Mount the new contactor and reconnect each wire per your photo, torquing terminals snug.
Test — Restore power and confirm the contactor pulls in and the compressor and fan start on a call for cooling.

Signs You Need a Replacement

Loud humming or buzzing but compressor will not start
Burned, pitted, or welded contacts
Contactor chatters or drops out under load
No 24V pull-in or an open coil on a meter

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP 2-Pole 30A Contactor for RHH...

$27.95

Frequently Asked Questions

Does this Contactor fit my ICP RHH036S0XA0AAAA — 24V Coil 30 Amp | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP RHH036S0XA0AAAA — 24V Coil 30 Amp | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP RHH036S0XA0AAAA — 24V Coil 30 Amp | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu