Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP 2-Pole 30A Contactor for RGS303LSFA0AAAA — 24V Coil | Ships Today
ICP

ICP 2-Pole 30A Contactor for RGS303LSFA0AAAA — 24V Coil | Ships Today

SKU: 1171554 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This genuine OEM 2-pole definite-purpose contactor (part number 1171554) is rated for 30 amps with a 24-volt coil and is built for the ICP/Heil/Tempstar RGS303LSFA0AAAA system and its companion outdoor unit. The contactor is the electrically operated switch that closes the high-voltage circuit to the compressor and condenser fan motor when the 24V thermostat call energizes the coil. After many thousands of switching cycles the silver contacts pit, burn, and eventually weld together, while the coil can short or weaken and lose magnetic pull. Symptoms include a loud buzzing or chattering at the unit, contacts stuck closed so the system never shuts off, or a unit that won't start on a cooling call. Installing this 30A 2-pole contactor restores clean, positive switching and protects the costlier compressor and motor it feeds.

Specifications

Spec Value
OEM Part Number 1171554
Type Definite Purpose Contactor
Brand ICP / Heil / Tempstar
Poles 2-Pole
Contact Rating 30 Amps
Coil Voltage 24 VAC
Fits Model RGS303LSFA0AAAA

Compatibility

Designed for the ICP/Heil/Tempstar/Comfortmaker RGS303LSFA0AAAA system and other ICP-family units calling for a 2-pole, 30A, 24V definite-purpose contactor. Confirm pole count, amp rating, and coil voltage against the contactor you are removing before installing.

Installation Guide

  1. Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter before touching any terminals.
  2. Access — Remove the service/electrical panel to expose the contactor.
  3. Document — Photograph all line, load, and 24V coil wires before disconnecting.
  4. Remove — Loosen the terminal screws, release the wires, and unbolt the old contactor from its bracket.
  5. Install — Mount the new 30A contactor and reconnect each wire to the matching terminal per your photo.
  6. Test — Restore power, place a cooling call, and confirm the contactor pulls in cleanly with no chatter.

Signs You Need a Replacement

  • Loud buzzing, humming, or chattering at the unit.
  • Pitted, burned, or welded-shut contacts.
  • Compressor or fan won't start on a call for cooling.
  • System runs continuously because contacts won't release.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my ICP RGS303LSFA0AAAA — 24V Coil | Ships Today?
Yes. This is the factory-specified OEM contactor for the ICP RGS303LSFA0AAAA — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my ICP RGS303LSFA0AAAA — 24V Coil | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online