Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP 2-Pole 30A Contactor for RGS240LRAA0AAAA — 24V Coil OEM 1171554 | Ships Today
ICP

ICP 2-Pole 30A Contactor for RGS240LRAA0AAAA — 24V Coil OEM 1171554 | Ships Today

SKU: 1171554-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This is the genuine OEM 2-pole, 30-amp contactor with a 24V coil (part number 1171554) for the ICP / Tempstar / Heil RGS240LRAA0AAAA package unit. The contactor is the high-current relay that closes when the thermostat calls for cooling, energizing the compressor and condenser-fan circuit. Its contacts switch line voltage thousands of times per season, so they eventually pit, weld, or chatter. Typical failure symptoms include a unit that won't start on a cooling call, a loud buzzing or chattering at the contactor, contacts that stick closed (so the compressor never shuts off), and visible burning or pitting on the contact faces. Installing a fresh OEM-rated contactor restores clean, reliable switching and protects the compressor from low-voltage and single-phasing damage.

Specifications

Spec Value
OEM Part Number 1171554
Description Contactor 2P 30A 24V
Type 2-Pole
Rating 30 Amps
Coil Voltage 24V
Brand ICP / Tempstar / Heil
Fitment OEM Direct Replacement

Compatibility

Direct-fit OEM replacement for the ICP/Tempstar/Heil RGS240LRAA0AAAA rooftop package unit and other ICP-built equipment that originally used the 2-pole 30A 24V contactor 1171554. Verify pole count, amp rating, and 24V coil match your original before installing.

Installation Guide

  1. Safety First — Disconnect power and verify zero voltage with a multimeter on both the line and 24V control sides.
  2. Access — Remove the electrical service panel.
  3. Document — Photograph every line, load, and coil wire before disconnecting.
  4. Remove — Transfer one wire at a time (or label them), then unbolt the old contactor from its bracket.
  5. Install — Mount the new contactor, reconnect each lead per your photo, and confirm the 24V coil leads are on the coil terminals.
  6. Test — Restore power, place a cooling call, and confirm the contactor pulls in cleanly and the compressor starts.

Signs You Need a Replacement

  • Loud buzzing or chattering when the system calls for cooling
  • Contacts pitted, burned, or welded shut
  • Compressor won't start, or won't shut off
  • Coil reads open on a meter (no pull-in)

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my ICP RGS240LRAA0AAAA — 24V Coil OEM 1171554 | Ships Today?
Yes. This is the factory-specified OEM contactor for the ICP RGS240LRAA0AAAA — 24V Coil OEM 1171554 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my ICP RGS240LRAA0AAAA — 24V Coil OEM 1171554 | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online