Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP 2-Pole 30A Contactor for RGS213STEA0AAAA — 24V Coil | Ships Today
ICP

ICP 2-Pole 30A Contactor for RGS213STEA0AAAA — 24V Coil | Ships Today

SKU: 1171554-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This genuine ICP/Tempstar/Heil contactor (OEM part number 1171554) is a 2-pole, 30-amp electromechanical switch with a 24-volt control coil. The contactor is the workhorse relay that energizes high-voltage components — it receives a low-voltage 24V signal from the control board or thermostat circuit and closes its main contacts to deliver line voltage to the motor or heating load. When a contactor fails, the system either won't start at all or chatters, buzzes, and welds its contacts shut. Pitted, burned, or stuck contacts are the single most common no-start callback in field service. Replacing this 30A 2-pole contactor restores clean, reliable switching and protects downstream components from voltage drop and arcing damage.

Specifications

Spec Value
OEM Part Number 1171554
Type Definite Purpose Contactor, 2-Pole
Brand ICP (Tempstar / Heil / Comfortmaker)
Full Load Amps 30A
Coil Voltage 24V
Poles 2
Fit OEM Direct Replacement

Compatibility

Direct-fit replacement for ICP, Tempstar, Heil, and Comfortmaker model RGS213STEA0AAAA and many other ICP-family gas furnace and condensing unit assemblies that use a 2-pole 30A 24V contactor. Always verify your existing contactor's amp rating, pole count, and coil voltage against the part you remove.

Installation Guide

  1. Safety First — Disconnect power at the breaker and service disconnect, then verify zero voltage at the contactor terminals with a multimeter before touching wiring.
  2. Access — Remove the service panel covering the control compartment.
  3. Document — Photograph every wire and terminal position before disconnecting anything.
  4. Remove — Label and disconnect the line, load, and 24V coil leads, then unscrew the old contactor from its mounting rail or bracket.
  5. Install — Mount the new contactor, reconnect all leads exactly per your photo, and confirm the coil leads land on the correct low-voltage terminals.
  6. Test — Restore power, call for operation, and confirm the contacts pull in cleanly with no chatter or buzzing.

Signs You Need a Replacement

  • System won't start or starts intermittently
  • Loud humming, buzzing, or chattering at the contactor
  • Visible pitting, burning, or melted plastic on the contacts
  • Contacts stuck closed so the unit runs continuously

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day hassle-free returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my ICP RGS213STEA0AAAA — 24V Coil | Ships Today?
Yes. This is the factory-specified OEM contactor for the ICP RGS213STEA0AAAA — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my ICP RGS213STEA0AAAA — 24V Coil | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online