Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP 2-Pole 30A Contactor for RGS180SRAA0AAAA — 24V Coil | Ships Today
ICP

ICP 2-Pole 30A Contactor for RGS180SRAA0AAAA — 24V Coil | Ships Today

SKU: 1178074 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This genuine OEM 2-pole contactor (part #1178074) is the high-voltage switching relay for your ICP, Tempstar, and Heil RGS180SRAA0AAAA gas furnace and connected condensing unit. Rated at 30 amps with a 24-volt control coil, the contactor energizes when the thermostat calls for cooling or heating, closing its contacts to deliver line voltage to the compressor and condenser fan motor. Over years of cycling, the contact points pit, burn, and weld together from arcing, while the coil can lose its magnetic pull. A failed contactor is one of the most common no-cool/no-heat service calls — symptoms include a buzzing or chattering sound, a unit that won't start, or a condenser that runs continuously even after the thermostat is satisfied.

Specifications

Spec Value
Part Number 1178074
Type 2-Pole Definite Purpose Contactor
Brand ICP / Tempstar / Heil
Current Rating 30 Amps
Coil Voltage 24V
Poles 2

Compatibility

Engineered as the factory replacement for the ICP/Tempstar/Heil RGS180SRAA0AAAA. This 2-pole 30A 24V contactor is also a common service part across many ICP-family residential furnaces and split-system condensers using the same control specification. Always confirm amperage and coil voltage against the part you are removing.

Installation Guide

  1. Safety First — Disconnect power at the breaker and condenser disconnect; verify zero voltage with a multimeter before touching any terminal.
  2. Access — Remove the service panel from the unit's electrical compartment.
  3. Document — Photograph all wire connections before disconnecting anything.
  4. Remove — Disconnect the line, load, and 24V coil wires, then unscrew the old contactor from its mounting bracket.
  5. Install — Mount the new contactor and reconnect each wire exactly per your photo.
  6. Test — Restore power and confirm the contactor pulls in cleanly with no chatter when the system calls.

Signs You Need a Replacement

  • Loud humming, buzzing, or chattering from the contactor
  • Pitted, blackened, or welded contact points
  • Unit won't start or fails to shut off
  • Visible arcing or a burnt smell at the terminals

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my ICP RGS180SRAA0AAAA — 24V Coil | Ships Today?
Yes. This is the factory-specified OEM contactor for the ICP RGS180SRAA0AAAA — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my ICP RGS180SRAA0AAAA — 24V Coil | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online