Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP 2-Pole 30A Contactor for RGS150SEBA0AAAA — 24V Coil OEM Contactor | Ships Today
ICP

ICP 2-Pole 30A Contactor for RGS150SEBA0AAAA — 24V Coil OEM Contactor | Ships Today

SKU: 1178074-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This OEM 2-Pole 30-Amp Contactor with a 24-volt coil (part number 1178074) is the electrical switch that energizes the compressor and condenser fan motor in your ICP / Tempstar / Heil RGS150SEBA0AAAA package unit. When the thermostat calls for cooling, 24V applied to the coil pulls the contacts closed, sending line voltage to the compressor and fan. Over time the contacts pit, burn, and weld from arcing, while the coil can fail open — causing no-cool conditions, chattering, buzzing, or a compressor that won't start. A 30A 2-pole contactor with a 24V control coil is the exact OEM spec for this unit, and replacing a worn contactor restores reliable, safe switching.

Specifications

Spec Value
Part Number 1178074
Type Definite Purpose Contactor, 2-Pole
Brand ICP / Tempstar / Heil
Contact Rating 30 Amps
Coil Voltage 24 VAC
Poles 2
Fitment OEM exact replacement

Compatibility

Direct OEM replacement for the ICP Tempstar Heil RGS150SEBA0AAAA gas-electric package unit. This 2-pole, 30A, 24V-coil contactor matches the original control circuit and load wiring. Confirm your existing contactor is rated 2-pole / 30A / 24V coil and matches part 1178074 before ordering.

Installation Guide

  1. Safety First — Disconnect power at the disconnect and verify zero voltage across all terminals with a multimeter. The compressor can store charge.
  2. Access — Remove the electrical/control access panel to expose the contactor.
  3. Document — Photograph every line, load, and 24V coil wire before disconnecting anything.
  4. Remove — Transfer wires one at a time or label them, then unscrew the old contactor from its mounting.
  5. Install — Mount the new contactor and reconnect each wire to the matching L1/L2, T1/T2, and 24V coil terminals per your photo.
  6. Test — Restore power, initiate a cooling call, and confirm the contactor pulls in cleanly and the compressor and fan energize.

Signs You Need a Replacement

  • Pitted, burned, or welded/stuck contacts
  • Loud humming, buzzing, or chattering at the contactor
  • Compressor or condenser fan won't start on a cooling call
  • Coil tests open or shows no continuity

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my ICP RGS150SEBA0AAAA — 24V Coil OEM Contactor | Ships Today?
Yes. This is the factory-specified OEM contactor for the ICP RGS150SEBA0AAAA — 24V Coil OEM Contactor | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my ICP RGS150SEBA0AAAA — 24V Coil OEM Contactor | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online