Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP 2-Pole 30A Contactor for RGS120SFCA0AAA | 24V Coil | Ships Today
ICP

ICP 2-Pole 30A Contactor for RGS120SFCA0AAA | 24V Coil | Ships Today

SKU: 1178074-GEN Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This OEM 2-pole, 30-amp contactor with a 24V coil (part number 1178074) is the primary switching relay for the ICP / Tempstar / Heil RGS120SFCA0AAA. When the control circuit sends 24 volts to the coil, the electromagnet pulls the double-pole contacts closed and delivers line voltage to the load — typically the compressor and condenser fan motor in a cooling or heat-pump section. Contactors are high-cycle, high-current devices and are one of the most common HVAC failures: the contact points pit, arc, and burn over time, and the coil can open or weaken. Symptoms of a failing contactor include a system that will not start, a humming or chattering contactor that won't pull in, contacts that weld closed so the unit runs continuously, and visible burning or pitting on the contact faces. This direct-replacement contactor restores clean, reliable switching.

Specifications

Spec Value
Part Number 1178074
Type Contactor, 2-Pole
Brand ICP / Tempstar / Heil
Contact Rating 30A
Coil Voltage 24V
Poles 2
Application Compressor / Condenser Fan Switching
Fitment OEM Direct Replacement

Compatibility

Direct OEM fit for the ICP / Tempstar / Heil RGS120SFCA0AAA and other ICP-family units using a 2-pole 30A contactor with a 24V coil. Confirm pole count, amp rating, and coil voltage against your existing contactor before ordering.

Installation Guide

  1. Safety First — Disconnect power at the disconnect and breaker, and verify zero voltage with a multimeter.
  2. Access — Remove the electrical compartment service panel.
  3. Document — Photograph all line, load, and 24V coil wires before disconnecting.
  4. Remove — Transfer wires one at a time or label them, then unscrew and remove the old contactor.
  5. Install — Mount the new contactor and reconnect each wire to the matching terminal per your photos, tightening all lugs.
  6. Test — Restore power, call for cooling, and confirm the contactor pulls in cleanly and the compressor and fan energize.

Signs You Need a Replacement

  • System won't start even though the coil is getting 24V.
  • Loud humming, buzzing, or chattering at the contactor.
  • Contacts welded closed, leaving the unit running nonstop.
  • Burned, pitted, or melted contact points or terminals.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my ICP RGS120SFCA0AAA | 24V Coil | Ships Today?
Yes. This is the factory-specified OEM contactor for the ICP RGS120SFCA0AAA | 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my ICP RGS120SFCA0AAA | 24V Coil | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online